Actions

AVR Microcontroller Class 2009: Difference between revisions

From HacDC Wiki

No edit summary
 
(36 intermediate revisions by 7 users not shown)
Line 1: Line 1:
Syllabus, course material, homeworks, photos, etc from an Introduction to Microcontrollers with AVR chips class can be found here.   
Syllabus, course material, homeworks, photos, etc from a previous Introduction to Microcontrollers with AVR chips class can be found here.   
 
For the current class, head on over to [[AVR Microcontroller Class 2011]]


Also see (and contribute to) [[Useful AVR Links]]
Also see (and contribute to) [[Useful AVR Links]]
Line 16: Line 18:
* Slides from class: [[Media:class0.pdf]]
* Slides from class: [[Media:class0.pdf]]
* ATmega48P Datasheets (get both): [http://www.atmel.com/dyn/resources/prod_documents/8025S.pdf ATmega48P Summary Datasheet] and [http://www.atmel.com/dyn/resources/prod_documents/doc8025.pdf The Long ATmega48P Datasheet]   
* ATmega48P Datasheets (get both): [http://www.atmel.com/dyn/resources/prod_documents/8025S.pdf ATmega48P Summary Datasheet] and [http://www.atmel.com/dyn/resources/prod_documents/doc8025.pdf The Long ATmega48P Datasheet]   
* Download the software part of the toolchain:  For Mac folks: [http://www.obdev.at/products/avrmacpack/index.html AVR Mac Pack]. For Windows folks: [http://winavr.sourceforge.net/ WinAVR]. For Ubuntu linux folks: "sudo apt-get install build-essential avr-libc binutils-avr gcc-avr avrdude"
* Download the software part of the toolchain:  For Mac folks: [http://www.obdev.at/products/avrmacpack/index.html AVR Mac Pack]. For Windows folks: [http://winavr.sourceforge.net/ WinAVR] and the Atmel IDE [http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2725 AVR Studio]. For Ubuntu linux folks: "sudo apt-get install build-essential avr-libc binutils-avr gcc-avr avrdude"
* Programmer and mega48 pinouts: [[Image:FFVH7HBF5UO1JMR.MEDIUM.jpg]] [[Image:Screenshot-ATmega48-88-168.png|320px]]
* Programmer and mega48 pinouts: [[Image:FFVH7HBF5UO1JMR.MEDIUM.jpg]] [[Image:Screenshot-ATmega48-88-168.png|320px]]


== Class 1: Programmer Hookup and Hello World LED Blinking ==
== Class 1: Programmer Hookup and Hello World LED Blinking ==


Lecture on how the programmer works -- simple serial interface basics.  Some basics on avrdude / GCC tools. Hook up the programming interface wire-by-wire to the Mega48 chip and flash it with a simple program.  The hook up an LED to the output port and watch it blink!
Lecture on how the programmer works -- simple serial interface basics.  Some basics on avrdude / GCC tools. Hook up the programming interface wire-by-wire to the Mega48 chip and flash it with a simple program.  Then hook up an LED to the output port and watch it blink!


'''Resources'''
'''Resources'''
Line 49: Line 51:
'''Resources'''
'''Resources'''


* [[Media: registers.zip]]
* [http://elliotwilliams.org/avrclass/registers.zip registers.zip ]
* [http://elliotwilliams.org/avrclass/cylonEyes.zip cylonEyes.zip ] 
* [http://elliotwilliams.org/avrclass/introPWM.zip  introPWM.zip] 
* Class notes: [[Media:class2.pdf]]
 
'''Homework'''
 
* So you can make various lights blink and/or dim.  Now what?  Cross-fading cylon eyes?  Patterns?  Something groovy?
 
* Note that you've got an 8-bit display if you're willing to read out numbers in binary.  Useful for debugging later on, for sure.  What else?  Binary clock?  Simple upcounter?  Display "random" numbers?
* If you could swing it around, you'd be on your way to a [http://www.ladyada.net/make/minipov3/index.html POV toy].
 
== Class 3: Inputs: Buttons  ==
 
Gather data from the world.  The lecture ended up being just on digital input. 
 
Labs: One note organ
[[Media: class3.pdf]]
 
 
== Class 4: Inputs: Debouncing and Analog-to-Digital conversion (ADC)  ==
 
This class, we'll get to debouncing our button input, and reading in continuous voltages
 
For more info on ADC stuff, see [http://www.avrfreaks.net/index.php?module=Freaks%20Files&func=viewFile&id=383&showinfo=1 this note]
 
Labs: pushbutton organ, light-dependent theremin.
 
[[Media: class4.pdf]]
<br>
[[Media: debouncedMusicbox.zip]]
<br>
[[Media: lightDependentTheremin.zip]]
 
== Class 5: Serial I/O and Interrupts I ==
 
Laptop, meet AVR.  AVR, laptop.  Serial communication (plus serial-to-USB cable) lets you connect your micro to about anything, including your computer.  Interrupts let the hardware (pins, serial port, timers, etc) call run functions for you, with the main body of your code picking up where you left off.  Combine the two, and you can get pushbutton control of an AVR from your laptop keyboard.
 
[[Media: helloSerial.zip]]
<br>
[[Media: helloInterrupts.zip]]
<br>
[[Media: class5.pdf]]
<br>
 
And as a bonus, if you run Python, [http://www.jerkpile.com/serialScope.py serialScope.py] provides a helpful debugging tool and an example of how simple USB/Serial code can be on the laptop side.  Coupled with on-chip ADC, it's a (low speed, sideways) serial oscilloscope.  Otherwise, a handy debugging aide.
 
'''Homework:'''  Take the scale.h from last class, and using input from your laptop, make a full keyboard out of the AVR plus speaker.  Or write a ROT-13 device that takes your input and returns the encoded version.


* [[Media: cylonEyes.zip]]
== Class 6: Timers/Counters and Interrupts II ==


* [[Media: introPWM.zip]]
Timers/counters let you do precision things with time.  Fix up that nasty audio tone from the LDR theremin.  Precise timing allows you to use LED's as light sensors.  It's also good for making quality analog output and for directing servo motors.  Interrupts + timers = deluxe PWM.  Or give your AVR a solid internal timebase.  (You know you want to.)
In this class, we'll scratch the surface of what you can do with timers.


* Class notes: [[Media: class1.pdf]]


== Class 3: Inputs: Buttons and Analog-to-Digital conversion (ADC)  ==
[[Media: timerPWM.zip]]


Gather data from the world.  
[[Media:  timerPWM_ctc_hardware_toggle.c]]


Labs: pushbutton organ, light-dependent theremin.  Extra credit:
something else!


== Class 4: Interrupts and Timers ==
== Extra Credit: I2C ==


Interrupts call subroutines when certain conditions are true. Timers
Talked a bit about the I2C serial protocol -- a light-weight serial multi-master bus using two wires (plus ground) and capable of addressing 127 different devices.  Great for connecting to all sorts of peripherals.
let you time stuff. Together, they take a lot of the programming
burden off your shoulders, and enable really cool stuff.  


Labs: Driving servo motors and/or build a better audio synth, use an
Demoed an $20 I2C 3-axis accelerometer using bare-minimum I2C code, with none of the error-checking that the pro's would do. But it works a charm.  That's why it's called hacking, baby!
LED as a light-source and light-sensor. Extra credit: capacitive
touch-switch!


== Class 5: Serial I/O ==
[[Media: i2c_class.pdf]]


Make the micro speak to your computer (and vice-versa). We can also
[[Media: i2c_accelerometer.zip]]
cover other serial protocols (I2C, SPI).  


Labs: Basic serial in/out, data-logging light sensor.  Maybe SD/MMC
[[Category:AVR_Class]]
cards? Extra credit: ADC + serial output + Python + laptop = ghetto
oscilloscope.

Latest revision as of 20:46, 3 April 2012

Syllabus, course material, homeworks, photos, etc from a previous Introduction to Microcontrollers with AVR chips class can be found here.

For the current class, head on over to AVR Microcontroller Class 2011

Also see (and contribute to) Useful AVR Links


Class 0: Introduction and Setup

What the AVRs are, what all the pins do, what they can do for you. Then the toolchain: soldering together the programmer kits, getting the software up and running.

Labs: building the kit and running a test LED flasher. (Almost all lab today, little talk.)

Resources:

Class 1: Programmer Hookup and Hello World LED Blinking

Lecture on how the programmer works -- simple serial interface basics. Some basics on avrdude / GCC tools. Hook up the programming interface wire-by-wire to the Mega48 chip and flash it with a simple program. Then hook up an LED to the output port and watch it blink!

Resources

  • Wiring Diagram: Wiring.png

Homeworks

  • Your kit has 10 resistors and 10 LEDs. If you want, you can solder them together to make [AVR: LED Blinkenlights].
  • If you didn't already, make labels for the signal wires. Think of an easy way to remember which go where (into the 6-pin or 10-pin header). And/or make permanent programmer "pigtails" by soldering the signal wires to a 2x3 header in the correct orientation (headers available in the HacDC hackersmart for pennies).
  • Play around with the delays in the LED_Demo.c code. Make the blinking faster or slower. Experiment with on time and off time.

Class 2: Outputs: Bit Math, Cylon Eyes, and PWM Fading

How to make chips speak to the outside world, pin-by-pin. Enough C bitwise-math operations to make it work. Pulse-width modulation.

Labs: Visualizing bytes, Cylon eyes, and dimming LED's. Extra credit: cross-fading cylon eyes!

Resources

Homework

  • So you can make various lights blink and/or dim. Now what? Cross-fading cylon eyes? Patterns? Something groovy?
  • Note that you've got an 8-bit display if you're willing to read out numbers in binary. Useful for debugging later on, for sure. What else? Binary clock? Simple upcounter? Display "random" numbers?
  • If you could swing it around, you'd be on your way to a POV toy.

Class 3: Inputs: Buttons

Gather data from the world. The lecture ended up being just on digital input.

Labs: One note organ Media: class3.pdf


Class 4: Inputs: Debouncing and Analog-to-Digital conversion (ADC)

This class, we'll get to debouncing our button input, and reading in continuous voltages

For more info on ADC stuff, see this note

Labs: pushbutton organ, light-dependent theremin.

Media: class4.pdf
Media: debouncedMusicbox.zip
Media: lightDependentTheremin.zip

Class 5: Serial I/O and Interrupts I

Laptop, meet AVR. AVR, laptop. Serial communication (plus serial-to-USB cable) lets you connect your micro to about anything, including your computer. Interrupts let the hardware (pins, serial port, timers, etc) call run functions for you, with the main body of your code picking up where you left off. Combine the two, and you can get pushbutton control of an AVR from your laptop keyboard.

Media: helloSerial.zip
Media: helloInterrupts.zip
Media: class5.pdf

And as a bonus, if you run Python, serialScope.py provides a helpful debugging tool and an example of how simple USB/Serial code can be on the laptop side. Coupled with on-chip ADC, it's a (low speed, sideways) serial oscilloscope. Otherwise, a handy debugging aide.

Homework: Take the scale.h from last class, and using input from your laptop, make a full keyboard out of the AVR plus speaker. Or write a ROT-13 device that takes your input and returns the encoded version.

Class 6: Timers/Counters and Interrupts II

Timers/counters let you do precision things with time. Fix up that nasty audio tone from the LDR theremin. Precise timing allows you to use LED's as light sensors. It's also good for making quality analog output and for directing servo motors. Interrupts + timers = deluxe PWM. Or give your AVR a solid internal timebase. (You know you want to.) In this class, we'll scratch the surface of what you can do with timers.


Media: timerPWM.zip

Media: timerPWM_ctc_hardware_toggle.c


Extra Credit: I2C

Talked a bit about the I2C serial protocol -- a light-weight serial multi-master bus using two wires (plus ground) and capable of addressing 127 different devices. Great for connecting to all sorts of peripherals.

Demoed an $20 I2C 3-axis accelerometer using bare-minimum I2C code, with none of the error-checking that the pro's would do. But it works a charm. That's why it's called hacking, baby!

Media: i2c_class.pdf

Media: i2c_accelerometer.zip