Actions

Regular Member Meeting 2017 02 14

From HacDC Wiki

Revision as of 05:07, 14 February 2017 by 108.48.147.166 (talk) (→‎Member Reports: summary)


Time and Location

Date: February 14, 2017
Called to order at xxxx pm by xxxx
Members present:
Members remote:
Others present:
Quorum
Quorum met?

Approval of Previous Meeting's Minutes

http://wiki.hacdc.org/index.php/Regular_Member_Meeting_2017_01_10

Recognition

  • We had an annual meeting, so welcome to our two new board members: Ben and Kevin.
  • Ben put up some more classroom decor.
  • Julia (et al?) got the Lulzbot printing rubber parts.

New Members

Old Business

  • Bylaws amendment proposal (unless it was already voted on?): Change the threshold for future bylaws amendments from "more than three quarters (3/4ths) of voting members," to "more than three quarters (3/4ths) of member votes cast 90 days from the proposal approval date," and from "Notice of such petition must be submitted electronically to all members," to "Notice of such a petition must be submitted to all members electronically and, where electronic means produce no response, all other available means." (Explanation: We are dangerously close to having 1/4th of members not respond aye/nay and making amendments impossible) - Enrique

New Business

  • There's been some discussion of changing or frequently rotating door key-codes since the church was robbed last week; we would prefer some kind of RFID thing... discussions ongoing I guess.

Project Awesome Reports

Project SUPPLIES

Project EXPANSION

Project HAMRADIO

Project Electron Microscope (SEM)

  • Ethan left, so for now Enrique is POC for Project SEM. This is... ok, I guess.
  • We received the new vacuum gauge; it did not include the power adatper. It's a simple part: DC power supply 2W between 9 and 30V connected to an HD15 (VGA) conncetor. It's an easy job but saying that doens't make it more completed. Help wanted.

Project Optical Table Robot (OTR)

Project CRISPR

We repeated the experiment last week with new materials, unfortunately with mixed results, i.e. the CRISPR sample worked, but the control also worked. So there may be a problem with the Strep-Kan plates or new bacteria strain L21. I suppose it should be done again with both L21 and HME63 strains but maybe someone other than me should go through it this time. I think the next meeting will be Thursday night around 8. It's not on MeetUp because we obviously aren't getting it right. - Enrique

Project SpaceBlimp

Member Reports

  • Enrique: (1) March for Science is April 22 - I expect I'll go and I'm thinking of what signs and message would be good to promote. There are DIY instructions for LED-lit signs for example. I think HacDC might want to get more involved in the non-partisan parts of this event, just to start brainstorming. (2) Our best projector has gone 'missing.' Our second-best is mediocre in the contrast department and VGA-only. It would be nice to have good modern projector for presentations in the auditorium. (3) After the meeting, we'll go through encrypted messaging, encrypted voice calls with Signal and encrypting email with PGP, for whoever wants to stick around.

Director Reports

President's Report

Vice President's Report

Treasurer's Report

  • Our income for January came 100% from membership dues. It was $1,330 from 30 members - 21 regular, 7 grandfathered in at $50/mo who never come around, 1 student member and 1 dues-waived member. Besides the usual rent, insurance and PayPal fees, we had two extra expenses in January: our vacuum gauge order finally went through ($611 from Project SEM) and a reimbursement to Mirage for 3D printer parts ($308 from Project Supplies). Rent rises from 993 to 1043 in February. Balances add up to $12,442.

Secretary's Report

Director-at-Large Reports

Kevin

Matt

Adjournment

Adjourned by at xxx by xxx