Actions

Regular Member Meeting 2014 04 08: Difference between revisions

From HacDC Wiki

Line 130: Line 130:
== New Business ==
== New Business ==


Allocate at least $750 to purchase and commissioning of a new 3D printer.
Allocate at least $750 to purchase and commissioning of a new 3D printer. Authorize Julia Longtin (aka. juri) to take possession of the existing Prusa Mendel 3D printer, in exchange for getting the new 3D printer up and running within a week of delivery.


=== Ben ===
=== Ben ===

Revision as of 03:33, 5 April 2014


Time and Location

April 8, 2014
Called to order at ____ by _____.
Members present:
Others present:
Quorum?
Quorum met?

Approval of Previous Meeting's Minutes

Annual Meeting 2014

Recognition

  • Everyone involved in moving the Scanning Electron Microscope!
  • Ben Mendis (sitwon) and haxwithaxe for truck driving!
  • Zach for improving CNC mill, Laser Cutter, and 3D printer functionality.

Director Reports

President's Report

Vice President's Report

Treasurer's Report

Here is the financial summary spreadsheet for March 2014: File:HacDC Financials 2014 03.pdf. We gained two members in the past month: Christopher Hermance and Kevin Cole. We didn't lose any members. We have 49 dues-paying members in good standing, two permanently dues-waived members, five temporarily dues-waived members, and three members who are behind on dues.


Project Awesome

Here is the Project Awesome spreadsheet for March: File:HacDC PA Projects-2014 03.pdf. We were back to a positive cash flow last month, so I can declare a Project Awesome dividend of $300 while adding the remaining $103.84 to our unearmarked reserves. There were 14 votes, unchanged from the previous month.

Secretary's Report

Director-at-Large Reports

Ben

We moved the SEM! It was quite an adventure and I'd like to thank everyone who helped us out with this.

Zach

Project Awesome Reports

Project LASER

Project BYZANTIUM

Project KITBUILD

Project SUPPLIES

Still healthy and stable. Pleased to see this month's expenses almost exactly matched income. Plan to spend the SUPPLIES fund as necessary to repair HacDC equipment. So long as we have at least a few hundred dollars reserve, this includes replacement parts for new equipment like the SEM.

Expenses

  • $57.95 Dial Test Indicator (Used to level the CNC mill.)
  • $20.47 Air dusters (General purpose and SEM cleaning supply.)

Projected

  • $100 in filament from Microcenter (receipt not yet submitted).
  • ~$10 LetraTag Material for Label Maker (need to order)
  • $80 in SEM supplies (projected)

Project EXPANSION

There have been no objections raised to purchase of a small vertical bandsaw like this one for less than the existing $145 budget:

VerticalBandsawExample.jpg

This should be at least as usable as the last bandsaw. Given our present financial situation, I think we should just get something suitable for cutting CNC mill/laser cutter stock rather than seek a more expensive machine.

If there are still no objections, will select the best one within the current EXPANSION budget, and direct Katie to order it. Preference will be given to support for cheap, standard blades.


Project SPACECAM

Member Reports

mirage335

Prusa Mendel

Was on the fence for a while what to do about this beast. After approximately 300 hours of work, there was every reason to expect the last maintenance cycle would be the last. However, multiple spontaneous failures now cast any plans for long-term stability into doubt. Even if we actually did stabilize it, the effort would be sunk into a slow (45mm/s vs. 300mm/s) machine with ever-present alignment issues. First-layer alignment in particular has been particularly difficult to maintain to any reasonable degree. The non-linear surface has been estimated as a 6th order problem.

Current state of the art designs are likely more than an order of magnitude better, using a 'delta-bot' configuration and highly rigid construction from aluminum extrusions. Such designs are not subject to many of the fundamental design flaws our Prusa Mendel suffers:

https://www.youtube.com/watch?v=PPyet-kDWMQ

Recommend we either purchase one of these, or direct our efforts away from 3D printing until we are ready to fully polish off our own designs (eg. Optical Table, Flex Replicator, etc).

Recommend the Kossel mini kit ($600 + shipping). Julia Longtin (aka. juri) has expressed an interest in getting it running, in exchange for taking our Prusa Mendel. That would also give us some hope that it may become an experimental machine for educational purposes.

Biosignal Amplifier

As a reminder, fully operational and documented: http://wiki.hacdc.org/index.php/Category:BiosignalAmplifier

Photolithography PCB Fab

As a reminder, fully tested, working, and documented: http://wiki.hacdc.org/index.php/Category:Photolithography_PCB_Fab

Need to create a 'photolithography materials' box to keep the equipment organized and available.

SEM Progress

Organized the wiki pages and began research on replacement electronics. Looks like we need an FPGA managing a bunch of I2S ADC/DAC devices typically used on high-end 24bit 192kS/s soundcards. Have already thoroughly investigated the FPGA toolchains, and HacDC should have already have some usable FPGAs to begin experiments.

OpenProjector

Nearly there, another HacDC member has the final Giant Fresnel lens. Projector construction can commence once lens has been retrieved.

Imagnus, Flex Replicator, Optical Table

Still in the same state as last meeting. All in progress.

Unnecessary Mess

Spent >3.5 hours cleaning up work benches at HacDC. Some of the more egregious problems included a melted space heater plug, still plugged into a power strip, and a messy chemical spill. In all cases, the responsible parties could have cleaned up much more easily before leaving.

This does not concern any new items showing up at HacDC, nor project SEM, and probably not any other ongoing activity. Looks like someone using the space couldn't bother to put tools back where they came from or clean up after their mess. Seriously, who here feels comfortable leaving the space with a chemical spill on a work table to harden into sticky residue for the next user? Since I don't know, I can only politely request it not happen again.

This also goes for anyone administrating HacDC events - please watch your guests.

Cleanup

Literally just disposing of the sheer quantity of e-waste is a problem, owing to past inability to dispose of junk more frequently. Failing other options, Waste Management 'dumpster in a bag' is a possibility, at a cost of approximately $200 (not recommended).

Old Business

New Business

Allocate at least $750 to purchase and commissioning of a new 3D printer. Authorize Julia Longtin (aka. juri) to take possession of the existing Prusa Mendel 3D printer, in exchange for getting the new 3D printer up and running within a week of delivery.

Ben

In order to move the SEM I rented a truck and drove it down to Norfolk and back. I would like to get reimbursed the $724.94 for the truck rental.

New Members

Adjournment

Adjourned at ______.