Hexjunkie: Difference between revisions
From HacDC Wiki
(RC Bar, rolling keg under radio controll) |
|||
| Line 11: | Line 11: | ||
Materials | Materials | ||
Jazzy Jet 3 power chair disassembled to frame, motors and wheels | * Jazzy Jet 3 power chair disassembled to frame, motors and wheels | ||
55 Gallon Drum | * 55 Gallon Drum | ||
30 Gallon Drum | * 30 Gallon Drum | ||
IFI Victor 883 Speed Controllers | * IFI Victor 883 Speed Controllers | ||
SPEKTRUM BR6000 Receiver | * SPEKTRUM BR6000 Receiver | ||
SPEKTRUM DX6I Radio | * SPEKTRUM DX6I Radio | ||
8 cans of "The Great Stuff" Foam Insulation | * 8 cans of "The Great Stuff" Foam Insulation | ||
1 4'x8'x1/4 plywood | * 1 4'x8'x1/4 plywood | ||
1 2'x8'x2" pink non-fiberglass insulation | * 1 2'x8'x2" pink non-fiberglass insulation | ||
3" shower drain | * 3" shower drain | ||
2" to 1" reducer | * 2" to 1" reducer | ||
1" piping | * 1" piping | ||
pvc pipe to 3/8" threaded end | * pvc pipe to 3/8" threaded end | ||
Eternal Water hose valve | * Eternal Water hose valve | ||
Power Drill with bits | * Power Drill with bits | ||
Power Router for wood working | * Power Router for wood working | ||
Fine and Rough Grit Sand Paper | * Fine and Rough Grit Sand Paper | ||
2 cans of Flat Black spray paint | * 2 cans of Flat Black spray paint | ||
1" Dowel Rod (think stair hand rail) | * 1" Dowel Rod (think stair hand rail) | ||
Assembly: | Assembly: | ||
Latest revision as of 13:28, 16 June 2010
This is the user page for Hexjunkie
Included in this page you will find all of the projects that I have been involved with since coming into contact with HacDC.
RC Bar:
Objective: to build a moving bar that will contain at a minimum 1 keg of beer that has a pressurized tap and at a minimum 4 bottles of liquor. This bar should also be motorized and controlled through a radio in its MARK I phase.
MARK I: Materials
- Jazzy Jet 3 power chair disassembled to frame, motors and wheels
- 55 Gallon Drum
- 30 Gallon Drum
- IFI Victor 883 Speed Controllers
- SPEKTRUM BR6000 Receiver
- SPEKTRUM DX6I Radio
- 8 cans of "The Great Stuff" Foam Insulation
- 1 4'x8'x1/4 plywood
- 1 2'x8'x2" pink non-fiberglass insulation
- 3" shower drain
- 2" to 1" reducer
- 1" piping
- pvc pipe to 3/8" threaded end
- Eternal Water hose valve
- Power Drill with bits
- Power Router for wood working
- Fine and Rough Grit Sand Paper
- 2 cans of Flat Black spray paint
- 1" Dowel Rod (think stair hand rail)
Assembly:
Pictures will be included
Wiring Diagram will be included
Test:
This is the base test for radio controls wired to motors, this test was done with a mostly dead battery
(TO BE CONTINUED)