User:Hexjunkie
From HacDC Wiki
This is the user page for Hexjunkie
Included in this page you will find all of the projects that I have been involved with since coming into contact with HacDC.
RC Bar:
Objective: to build a moving bar that will contain at a minimum 1 keg of beer that has a pressurized tap and at a minimum 4 bottles of liquor. This bar should also be motorized and controlled through a radio in its MARK I phase.
MARK I: Materials
- Jazzy Jet 3 power chair disassembled to frame, motors and wheels
- 55 Gallon Drum
- 30 Gallon Drum
- IFI Victor 883 Speed Controllers
- SPEKTRUM BR6000 Receiver
- SPEKTRUM DX6I Radio
- 8 cans of "The Great Stuff" Foam Insulation
- 1 4'x8'x1/4 plywood
- 1 2'x8'x2" pink non-fiberglass insulation
- 3" shower drain
- 2" to 1" reducer
- 1" piping
- pvc pipe to 3/8" threaded end
- Eternal Water hose valve
- Power Drill with bits
- Power Router for wood working
- Fine and Rough Grit Sand Paper
- 2 cans of Flat Black spray paint
- 1" Dowel Rod (think stair hand rail)
Assembly:
Pictures will be included
Wiring Diagram will be included
Test:
This is the base test for radio controls wired to motors, this test was done with a mostly dead battery
(TO BE CONTINUED)