- Download the Frequency Counter and Frequency Generator reference designs from http://www.xilinx.com/products/boards/s3estarter/reference_designs.htm
- Download the Picoblaze processor core from http://www.xilinx.com/products/ipcenter/picoblaze-S3-V2-Pro.htm
- Unzip these projects & picoblaze source to your ~/Projects directory (or appropriatlely)
- Implementing the projects directly
- Each project comes with a .bit file that you can use to program the FPGA starter kit with. Use impact to program the chip.
- On Windows, you can run the install batch scripts to run impact automatically.
- Find a buddy with a board, and each of you program your respective boards. Grab an SMA cable and use that to check the output of the generator with the counter.
- Implementing the projects through ISE
- Implementing the frequency counter
- In the frequency counter folder, there is a pdf. It is the readme for the project. It will be your friend - it details how to quickly run the project, setup the ISE project, design details for the hardware and picoblaze software, and some more project ideas.
- In ISE, create a new design called "s3e_ref_freq_count" in your ~/Projects directory.
- Add the existing .vhd and .ucf sources from the frequency counter reference design folder that you unzipped
- Add the existing .vhd source for kcpsm3.vhd from the picoblaze VHDL source folder
- A portion of the design uses a undocumented mode of operation for the S3E DCM. Instructions for enabling this can be found in the dcm_fixed_osc.vhd file. In my experience, this breaks P&R (-will), and this should be removed in order to complete the design. The DCM is simply working in an free-running oscillator mode; this is merely used to provide a frequency source for testing and its removal will not adversely affect the design.
- You'll need to modify the frequency_counter.vhd file in the project, to remove the instance of 'dcm_fixed_osc.vhd' from the design. We won't be doing anything in-depth with VHDL so don't be intimidated by the different language syntax.
- You'll want to comment out the component dcm_fixed_osc (approx line 117) . In VHDL, comments are done with double hypens, --.
- Commented out component
--
-- Fixed frequency oscillator using a DCM
--
--component dcm_fixed_osc
-- port( clk_out : out std_logic;
-- kick_start : in std_logic );
-- end component;
- The instantiation of the dcm_fixed_osc needs to be commented out (approximately line 223)
- Commented portion
-- dcm_fixed_oscillator: dcm_fixed_osc
-- port map ( clk_out => dcm_oscillator,
-- kick_start => source_control(7) );
- Now we'll need to change the multiplexer. To keep the design nearly intact, we'll replicate the ring oscillator signal twice (approx line 245).
- Changed multiplexer
freq_for_measurement <= sma_clk when (source_control(1 downto 0)="00")
else clk_50mhz when (source_control(1 downto 0)="01")
else ring_oscillator when (source_control(1 downto 0)="10")
else ring_oscillator;
- Select the top level module, and take it through the implementation process - synthesis, place and route, generate programming file.
- Use impact to program the .bit file to the FPGA! It should
- Implementing the frequency generator
- In the frequency generator folder, there is a pdf. It is the readme for the project. It will be your friend - it details how to quickly run the project, setup the ISE project, design details for the hardware and picoblaze software, and some more project ideas.
- In ISE, create a new design called "s3e_ref_freq_ref" in your ~/Projects directory.
- Add the existing .vhd and .ucf sources from the frequency ref reference design folder that you unzipped
- Add the existing .vhd source for kcpsm3.vhd from the picoblaze VHDL source folder
- A portion of the design uses a undocumented mode of operation for the S3E DCM. Instructions for enabling this can be found on page 13 of the Frequency generator documentation. The design will not work if the instructions are not followed!
- Afer this is done, you should be able to implement this design and program the FPGA with impact.
- Things you can do!
- You can use the .ucf file to move around the pin assignments. For instance, you can have the frequency counter read the clock input off of a stake or one of the pmod headers.3
- Easy extension - create a second ring oscillator, called ring_osc2. You can extend the ring_osc.vhd for this purpose, adding additional delay stages will decrease the frequency generated. Follow a similar format, to the rest of the VHDL code, to declare the component, instantiation, a second ring_oscillator signal, and modify the multiplexer.
- Once that is done, synthesis, P&R, and program the design. Select the second ring oscillator and see what its frequency is!
- Look at the PDF's which come with the reference designs for more ideas!
