Actions

Lulzbot Mini Ninjaflex

From HacDC Wiki

Revision as of 02:51, 21 February 2017 by Ubuntourist (talk | contribs) (Ninjaflex!)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

As of 2017.02.10 the Lulzbot Mini has been repaired and has a brand new extruder head. This extruder head uses NinjaFlex (TM) rubber filament only!

Cura users:

1. Download the newest version of the Lulzbot Edition of Cura from https://www.lulzbot.com/cura 2. Install and start Cura 3. From the menus: Machine -> Add New machine -> Lulzbot Mini 4. From the menus: Machine -> Machine Settings 5. Change Tool Head -> Flexystruder v2 6. E-steps per 1mm filament -> 918 7. OK 8. For your print material, choose NinjaFlex

The recommendation is 220 C for the melting temperature of the material, and it is currently advisable to lay down some glue.

Retrieved from "https://wiki.hacdcserver.org/index.php?title=Lulzbot_Mini_Ninjaflex&oldid=12986"