Actions

File

File:3DP PELstand printed gatohaus.jpg

From HacDC Wiki

Revision as of 13:59, 19 March 2013 by Gatohaus (talk | contribs) (2013.03.17 My first fully designed and printed piece. Need to learn how to make a honeycomb wall. The slots at the top were supposed to be 14mm wide, but came out as 11mm. All other dimensions came out correctly. Re-checking the model and the model's ST)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

3DP_PELstand_printed_gatohaus.jpg ‎(478 × 587 pixels, file size: 96 KB, MIME type: image/jpeg)

2013.03.17 My first fully designed and printed piece. Need to learn how to make a honeycomb wall. The slots at the top were supposed to be 14mm wide, but came out as 11mm. All other dimensions came out correctly. Re-checking the model and the model's STL file, in 2 programs, shows a 14mm width. I've no idea what happened.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current13:59, 19 March 2013Thumbnail for version as of 13:59, 19 March 2013478 × 587 (96 KB)Gatohaus (talk | contribs)2013.03.17 My first fully designed and printed piece. Need to learn how to make a honeycomb wall. The slots at the top were supposed to be 14mm wide, but came out as 11mm. All other dimensions came out correctly. Re-checking the model and the model's ST

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://wiki.hacdcserver.org/index.php?title=File:3DP_PELstand_printed_gatohaus.jpg&oldid=9112"