Actions

HacDC Spaceblimp 4

From HacDC Wiki

Spaceblimp-4 sucessfully launched and retrieved: April 10, 2011 Sb4 IMG 7739 small.JPG


Summary

We launched from Breezewood Elementary School‎ at 1:30 pm, the balloon popped at 2:41 pm at 103,764 ft, and touched back down at 3:09 pm. Again, we were exceptionally lucky with the recovery and were able to drive up to within 200 ft of the package.

The "package" contains two GPS units connected to radio modems that transmit the balloon's location every 30s, various instruments, and still and video cameras. It's all enclosed in super-space-age, soft-sided insulated lunchboxes and secured to pegboard, cushioned for landing with pink insulation foam.

Sb4 path.png Sb4 the package.jpg

Video


This time, in addition to running a still camera, we also put up a HD video camera running 720p at 60 frames/sec. The results are fantastic!

Notice how quickly it stabilized as the chute opened. Don't be deceived, though, it got up to 136 mph within the first minute of fall -- there's just not much chute drag in space.

  • SB4 launch on youtube. Skipping hours of preparation and 20 minutes filling up the balloon, going straight to the good stuff...

Why no movies in-between? The clouds were very heavy on launch day, and most of the footage is white-out. Something failed in the video camera a few minutes after popping too, so there's no re-entry video.


Data

On-board Logging

The on-board datalogger keeps records of interior/exterior temperature and GPS data.

Media: SB-4_flight_log.gz (and here's the code in R that generates the above images, and some PDFs to boot: Media: spaceblimp4_analysis.gz)


Sb4 altitude time.png Sb4 gpsHeading time.png Sb4 location.png Sb4 riseSpeed altitude.png Sb4 riseSpeed histogram.png Sb4 riseSpeed time.png Sb4 temp altitude.png Sb4 temp time.png Sb4 windspeed altitude.png Sb4 windspeed time.png

Accelerometer

The accelerometer package flown was the same as last time, with the exception of having half the memory, so there are 50 observations per second. The data are 0-255, with (roughly) 127 being no acceleration. If you graph it, you can clearly see liftoff, popping, and landing. Until we get some time for analysis, the rest is left up to you:

Sb4 accelerometer.png

Accelerometer CSV raw data Here's some python code to get you started with the accelerometer data: Media: analyseAccelerometer.py. (Requires pylab for plotting.)

Launch Plans (Historic)

Planned launch date: Sunday, April 10, 2011
Launch time: 10:00 AM, Launch should take less than an hour.
Launch Location:
Where: Breezewood Elementary School‎
Address: 133 North Main Street, Breezewood PA 15533-8142
Lat/Long: 39.9970,-78.2440
Coordination/Talk-in: 146.685 MHz simplex
Planned Altitude: 100,000 feet
Planned Ascent Rate: 1,300 ft/min
Planned Descent Rate: 1,000 ft/min
Primary Beacon: Tiny Track 4 with 0.5 W transmitter on 144.390 MHz, call sign W3HAC-11 (map). $3 GPS module
Secondary Beacon: Son-of-WhereAVR with ublox GPS. Yaesu VX-1 handi-talkie with 1 W Transmitter, call sign W3HAC-12 (map), Frequency 432.225 MHz
Payload: Still camera, HD video camera, Geiger counter to measure cosmic rays, a nine degree of freedom Inertial Measurement Unit, accelerometer, pressure, light and temperature sensors.

The balloon is a 2000g Kaymont/Totex with 291 cubic feet of helium. The total weight of the capsule is about five pounds.

HacDC Spaceblimp Project:
Main Page Press Page First Launch (Found) Second Launch (Successful)
Third Launch (Successful) Fourth Launch (Successful) Fifth Launch (3% short of goal) Sixth Launch (Successful) Seventh Launch (Successful)


HacDC Spaceblimp Team Contact Info:
[email protected]
Subscribe to the Spaceblimp email list