Documentation-Computer network

<nowiki> HacDC computer network - Jan. 2, 2020 It is possible to connect to items on the network using the internet or using the local network. To connect using the internet: 1. Enter ssh [email protected] (i.e., ssh [email protected]) 2. At Password: enter standard password

To connect using the HacDC network: 1. Enter ssh [email protected] (i.e., ssh [email protected]) 2. If the system asks Are you sure you want to continue connecting (yes/no)? enter: yes 3. At Password: enter standard password

To check if it is possible to communicate with a device: 1. Open a MATE terminal (if not already present; see Documentation-Tabletop_computers) 2. Enter ping machinename.hacdc.org or ping machinename.local (i.e., ping jobs.local) 3. If it responds ## bytes from ###... it is communicating 4. To stop pinging type Ctrl C

If the network will not connect: 1. Try using the other connection method (.local if .hacdc.org doesn't work or vice versa) 2. Check if it is possible to communicate by using ping (see above)

Components of the network: Renderadmin computer (large computer at left under table below clock) - for converting .escad files to .stl files for 3D printing etc. - machine name=jobs, system name=renderadmin 3D printer computer (Dell Optiplex 760 to left of Rostock) - controls Rostock, Mini, & Taz 3D printers - machine name=pronterhost, system name=hacdc Classroom TV computer (large LG Sharkoon below big screen) - controls screen -machine name=classroom-tv, system name=hacdc Laser cutter computer (small computer in cabinet below laser cutter) - controls laser cutter