Actions

OpticalSubsystems

From HacDC Wiki

Revision as of 20:59, 16 July 2014 by Mirage335 (talk | contribs)


Just as electronic breadboards often rely on integrated circuits (notably OpAmps), external power, and test equipment, optical tables also benefit from more than simple packaged lenses. Here we document the optical tools available at HacDC, many of which are self-made.

WideBeam Collimated Light Source

A wide beam of high-intensity collimated light is useful for manually checking the results of complicated optical beampaths.

DLP Light Structuring

HacDC has access to some DLP projectors, absent working light sources. These can be used as re-configurable image sources and high-speed light gates.

Tilt and Roll Platform

Even if we could afford them, commercial systems are too expensive to permanently dedicate to completed projects (~$500). Instead, we will 3D print or laser-cut a screw-adjusted spring-loaded platform, much the same as the adjustable bed used by many 3D printers.

Cages

Simple optical cage designs made from smooth or threaded rods. These allow quick, efficient transition between large and small elements using laser cut plates.

Standards

External

Standards set for us by manufacturers.

Internal

Standards we have elected to follow from the above, or have established ourselves, as we build our own tooling.

mirage335

Optical Table Axis Heights

Element Size Height Comments
Small 2" Intended for lenses up to 1" high, including salvaged projector, disposable camera, and microscope components.
Large 8" Accommodates larger lenses, particularly for light gathering and projection systems.
ExtraLarge 13" Accommodates modest Fresnel lenses.

Optical Rail Axis Heights

Element Size Height
Small 1.15"
Large 6.25"

Optical Cage Square Lengths

Element Size Height
Small 30mm/1.1811"
Medium 60mm/2.3622"
Large 6.25"

Reference