Prusa Mendel Documentation

This is the page on how to use the newly built Prusa Mendel (iteration 2). A PC has been dedicated to run it, below you will find the toolchain used to run it and other details that you may find useful.

Current Machine Status

Operational

Workflow

CAD/Thingiverse -> Netfabb -> STL -> Slic3r -> Pronterface -> PRINT!

CAD

Any modelling software that can output the file format STL.

Some programs of interest might be the following: Google Sketchup, OpenSCAD, TinkerCAD, Solid Works, AutoCAD, Rhino.

And in case you don't want to model anything and simply want to print stuff, go to Thingiverse.

Netfabb

software for checking the "3D printability" of the model you created. Go to Netfabb and download the Studio Basic option. You can also simply use their cloud offering and have a repaired model emailed back to you.

if your model has issues, run the repair function with default settings and see if that remedies the issues. The repair function can be used by clicking the "first aid" symbol found at the far right on the tool bar.

STL

current format for 3D printing (AMF is coming around the corner).

at this point, your file should be patched up and ready to print.

Slic3r

software for creating 3d printing toolpaths

precompiled binaries can be had from Slic3r.org or be built built from github.

use the profiles already generated for best results.

Pronterface

GUI for controlling the Prusa.

where you will connect to the printer, home, warm up and send print jobs from.

can be built from github or download precompiled binaries for Windows/Mac here.

preview G-Code generated by Slic3r.

Print

File is good to go, toolpaths are generated, time to let the robot do what it does best, PRINT!

Materials

• PLA
• ABS

PLA

Polylactic Acid

made from corn starch, smells like waffles/syrup while printing

less prone to warping

more brittle compared to ABS

needs a fan, it remains much more molten after being extruded

lower operating temperatures (160C-200C)

Preferred plastic of choice

ABS

same plastic in which LEGOs are made of

flexible

higher operating temps (220C-240C)

smells like death, can release carcinogens at higher temps

requires a heated bed (110C) or warping occurs

requires kapton/PET tape on heated print surface for best adhesion. Possibly a light sanding of the surface and slurry of dissolved ABS in acetone for further warp prevention.

Machine Setup/Specs

This Prusa is fitted with the following:

• Melzi - loaded with the latest Marlin firmware (as of 9/1/2012)
• 12V 30A PSU
• Makergear 0.35mm for 3mm filament hot end
• LM8UUs
• GT2 (2mm) belting and pulleys (5mm bore, 20 tooth)

For FW reference on steps per axis: (80, 80, 2560, 666.67) {X, Y, Z, E}, this is also assuming 1/16th microstepping