AVR Noise Toys: Difference between revisions
From HacDC Wiki
(New page: == Noise Toys == To turn a blinky LED program into a simple square-wave synthesizer, plug a speaker into PB4 and ground (where you had the LED before), then turn up the frequency. The c...) |
|||
Line 1: | Line 1: | ||
== Noise Toys == | == Noise Toys == | ||
To turn a blinky LED program into a simple square-wave synthesizer, plug a speaker into PB4 and ground (where | To turn a blinky LED program into a simple square-wave synthesizer, plug a speaker into PB4 and ground (where the LED was before), and turn up the frequency. | ||
The code is largely the same, just toggling a pin on and off, but now doing it at different speeds (for different tones) and for differing time periods (notes duration). | |||
== squareOne.c == | == squareOne.c == |
Revision as of 11:47, 17 June 2008
Noise Toys
To turn a blinky LED program into a simple square-wave synthesizer, plug a speaker into PB4 and ground (where the LED was before), and turn up the frequency.
The code is largely the same, just toggling a pin on and off, but now doing it at different speeds (for different tones) and for differing time periods (notes duration).
squareOne.c
/* Makes a quick square wave for noise-making experimentation. */ #include <inttypes.h> #include <avr/io.h> #define F_CPU 16000000L /* really? tested with the scope */ #include <util/delay.h> void init(void){ DDRB |= _BV(PB4); } int main(void){ uint8_t i, j, k; uint16_t wavelength; init(); while(1){ for (k = 10; k > 3; k--){ /* pitch multiplier: makes different notes */ wavelength = 20*k; for (j=0; j < 200/k; j++){ /* number of cycles at each pitch: controls speed of loop */ PORTB |= _BV(PB4); for (i=0; i < wavelength; i++) /* on for 20*wavelength microsecs */ _delay_us(20); /* loop needed b/c each call to the delay function can't delay all that long before it overflows */ PORTB &= ~_BV(PB4); /* off for 20*wavelength microsecs */ for (i=0; i < wavelength; i++) _delay_us(20); } } } }
spacePhaser.c
/* Starts with a very short pulse (high-frequency) and drops rapidly. */ #include <inttypes.h> #include <avr/io.h> #define F_CPU 16000000L /* really? tested with the scope */ #include <util/delay.h> void init(void){ DDRB |= _BV(PB4); } int main(void){ uint8_t i, j, k; uint16_t wavelength; init(); while(1){ for (k = 3; k < 120; k++){ /* pitch multiplier: makes different notes */ wavelength = k; for (j=0; j < 200/k; j++){ /* number of cycles at each pitch: controls speed of loop */ PORTB |= _BV(PB4); for (i=0; i < wavelength; i++) /* on for 20*wavelength microsecs */ _delay_us(20); /* loop needed b/c each call to the delay function can't delay all that long before it overflows */ PORTB &= ~_BV(PB4); /* off for 20*wavelength microsecs */ for (i=0; i < wavelength; i++) _delay_us(20); } } for (j=0; j < 60; j++){ /* with delay between shots */ for (i=0; i < 250; i++) _delay_us(200); } } }
chaosEngine.c
/* Now the frequency of the wave is a crazy function. */ #include <inttypes.h> #include <avr/io.h> #define F_CPU 16000000L /* really? tested with the scope */ #include <util/delay.h> void init(void){ DDRB |= _BV(PB4); } int main(void){ uint8_t i, j, k; uint16_t wavelength; init(); while(1){ wavelength = (13 * wavelength + 1) % 123 + 100; for (j=0; j < 30; j++){ /* number of cycles at each pitch */ PORTB |= _BV(PB4); for (i=0; i < wavelength; i++) /* on for 20*wavelength microsecs */ _delay_us(20); /* loop needed b/c each call to the delay function can't delay all that long before it overflows */ PORTB &= ~_BV(PB4); /* off for 20*wavelength microsecs */ for (i=0; i < wavelength; i++) _delay_us(20); } } for (j=0; j < 60; j++){ /* longer delay between shots */ for (i=0; i < 250; i++) _delay_us(200); } }