Prusa Mendel Documentation: Difference between revisions
From HacDC Wiki
Line 102: | Line 102: | ||
How do we make the best use of this? | How do we make the best use of this? | ||
Or, as per John's suggestion, do we just use 5/16" for the frame and save our 8mm for everything else? | |||
===Heated Build Platform=== | ===Heated Build Platform=== |
Revision as of 14:57, 24 May 2011
A new reprap printer will built along the lines of the Prusa Mendel. You can find details of the Prusa design at the Prusa Mendel page on the reprap wiki, or you can view the sources for the Prusa at github
Intro
Having another 3d printer in the space will allow us to always have a working machine and to use one machine to help fix another if there are problems. It will also enable several people to print things out at the same time. The goal is to document this build so others can make their own printer following our documentation.
Materials for the build
BOM for Prusa Mendel
Non-Printed Parts ("vitamins")
Quantity | Description | Type | Comments |
---|---|---|---|
83 | M8 nut | Fastener | READY |
93 | M8 washer | Fastener | (John) |
6 | M8×30 mudguard / fender washers | Fastener | (John) |
2 | M4×20 bolt | Fastener | (John) |
2 | M4 nut | Fastener | (John) |
2 | M4 washer | Fastener | (John) |
22 | M3×10 bolt | Fastener | READY |
8 | M3×20 bolt | Fastener | (John) / Space |
8 | M3×25 bolt | Fastener | READY |
4 | M3×40 bolt | Fastener | (John) / Space |
70 | M3 washer | Fastener | READY |
40 | M3 nut | Fastener | READY |
2 | M3 grub screw / set screw | Fastener | (John) / (Pete) will the M3 x 8 in the space work? |
3 | 608 roller skate / inline skate / skateboard bearing | Bearings | READY |
4 | ballpoint pen springs | Spring | READY |
6 | M8×370mm | Threaded rod | 3 per side - (Mark) / (Space) |
4 | M8×294mm | Threaded rod | front / rear - (Mark) / 2 x 600 Pete / (Space) |
3 | M8×440mm | Threaded rod | top / bottom - (Mark) / Pete / (Space) |
2 | M8×210mm | Threaded rod | Z-leadscrew - (Mark) / Pete / (Space) |
1 | M8×50mm | Threaded rod | or bolt for X idler - (John) / (Mark) / Pete / (Space) |
2 | 8mm×420mm | Smooth rod | X-bar - READY |
2 | 8mm×406mm | Smooth rod | Y-bar - READY |
2 | 8mm×350mm | Smooth rod | Z-bar - READY |
1 | 225mm×225mm print top plate | Thick Sheet | (space) |
1 | 140mm×225mm print bottom plate | Thick Sheet | space |
1 | 840mm×5mm T5 pitch timing belt | Belt | T2.5 from Pete if it's useful |
1 | 1380mm×5mm T5 pitch timing belt | Belt | T2.5 from Pete if it's useful |
5 | NEMA 17 bipolar stepper motor | Stepper | John |
50 | small cable binder / ziptie | Misc | (space) |
1 | Wade's Geared Extruder | (John) | |
1 | Electronics + endstops | gen3 from John or Tiny G from Alden | |
1 | RP parts | READY |
John
1x gen3 mobo 2x gen3 EC 5x steppers 4x stepper controllers (we'll have to pull these from the cupcake and have the cupcake use the mbi ones) 1x p4ac 4 axis stepper controller carrier board (we'll have to pull this from the cupcake too) 1x wade's extruder (assembled and working) 1x 36mm brass barrel 1x 0.5mm mbi nozzle 1x 0.5mm makergear bighead nozzle Insulator materials (have to make and document on lathe) nuts/bolts/washers - I have tons plywood/mdf for build platform
Still needed
Threaded Rod
We have:
- 340x6
- 600x2
- 480x1
- 400x3
How do we make the best use of this?
Or, as per John's suggestion, do we just use 5/16" for the frame and save our 8mm for everything else?
Heated Build Platform
If we want it, can get away with some other hacks if we want, or leave it out altogether.
Offers
Mark has threaded rod Alden has a Tiny G board... this is attractive