Actions

HacDC Spaceblimp 6: Difference between revisions

From HacDC Wiki

m (Added volume expansion numbers)
m (Minor rephrasing)
Line 38: Line 38:


===== Balloon Expansion =====
===== Balloon Expansion =====
The balloon's diameter at the burst altitude is 3.43 times its diameter at the launch altitude. Assuming the balloon is a sphere with a 1 meter radius at launch, its starting volume would then be 4.19 m3. This means the balloon's volume at the burst altitude is 169.03 m3, an expansion of 40.34 times the launch volume.
The balloon's diameter at the burst altitude is 3.43 times its diameter at the launch altitude. Assuming the balloon is a sphere with a 1 meter radius at launch, its starting volume is 4.19 m3. This means the balloon's volume at burst is 169.03 m3, an expansion of 40.34 times the launch volume.
----
----
[[Image: Sb6_balloon_size_comparison.jpg|720px]]
[[Image: Sb6_balloon_size_comparison.jpg|720px]]

Revision as of 21:51, 18 October 2016

If you want to get involved or learn more or contribute to the program...
Subscribe to the Spaceblimp email list

Sb6 peak.jpg

Flight Summary

Sb6 flight path.jpg

Date of launch: Saturday, October 15, 2016
Time of launch: 10:55
Time of landing: 13:09
Time of recovery: 13:28
Flight duration: 2:14:00
Peak recorded altitude: 104,023ft, (31706.2m)
Location of launch: Strasburg VA, (38 59'48.77"N 78 21'03.27"W)
Location of landing: Amissville VA, (38 40'51.56"N 77 55'58.29"W)
Distance (launch to landing): 31.36 mi, (50.47 km)

Upward Facing Camera

This flight's payload featured an upward facing camera to gain a better understanding of what goes on with the balloon, rigging, and parachute during the flight.

Balloon Expansion

The balloon's diameter at the burst altitude is 3.43 times its diameter at the launch altitude. Assuming the balloon is a sphere with a 1 meter radius at launch, its starting volume is 4.19 m3. This means the balloon's volume at burst is 169.03 m3, an expansion of 40.34 times the launch volume.


Sb6 balloon size comparison.jpg

Balloon Burst

Sb6 burst.gif


Current Mission

Since Global Space Balloon Challenge 2016 (GSBC) just ended, there is no better time than now to start planning for participation in, but not limited to, the GSBC 2017 challenge. HacDC has had some preliminary discussions with the Naval Research Laboratory (NRL) regarding some of their STEM initiatives which align well with our Spaceblimp project. This presents a great opportunity for HacDC to collaborate with the NRL and local area schools to assist students in preparing for the next GSBC or other balloon events. Besides helping young minds grow, we could also expand in to other STEAM initiatives and work side-by-side with distinguished researchers and scientists from the NRL.

Supplies and equipment are not an issue. Hands on help is. We need embedded hardware, software, FPGA, and RF engineers, licensed amateur radio operators, project developers, crafts people, decorators, coordinators, outreach specialists and educators. However, no one with helping hands or a willingness to learn will be turned away.

Current Projects

Spaceblimp 6 Links

HacDC Spaceblimp Project:
Main Page Press Page First Launch (Found) Second Launch (Successful)
Third Launch (Successful) Fourth Launch (Successful) Fifth Launch (3% short of goal) Sixth Launch (Successful) Seventh Launch (Successful)


HacDC Spaceblimp Team Contact Info:
[email protected]
Subscribe to the Spaceblimp email list