3DP PELstand printed gatohaus.jpg: Difference between revisions
From HacDC Wiki
(2013.03.17 My first fully designed and printed piece. Need to learn how to make a honeycomb wall. The slots at the top were supposed to be 14mm wide, but came out as 11mm. All other dimensions came out correctly. Re-checking the model and the model's ST) |
m (moved File:3DP printed gatohaus PELstand.jpg to File:3DP PELstand printed gatohaus.jpg: better naming convention) |
(No difference)
| |
Latest revision as of 14:01, 19 March 2013
2013.03.17 My first fully designed and printed piece. Need to learn how to make a honeycomb wall. The slots at the top were supposed to be 14mm wide, but came out as 11mm. All other dimensions came out correctly. Re-checking the model and the model's STL file, in 2 programs, shows a 14mm width. I've no idea what happened.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 13:59, 19 March 2013 |  | 478 × 587 (96 KB) | Gatohaus (talk | contribs) | 2013.03.17 My first fully designed and printed piece. Need to learn how to make a honeycomb wall. The slots at the top were supposed to be 14mm wide, but came out as 11mm. All other dimensions came out correctly. Re-checking the model and the model's ST |
You cannot overwrite this file.
File usage
The following page uses this file:
