Actions

CNC Mill Log: Difference between revisions

From HacDC Wiki

No edit summary
No edit summary
Line 2: Line 2:
When something goes wrong, its nice to note it here. Also nice to note any fixes (eg. resurfacing the milling platform).
When something goes wrong, its nice to note it here. Also nice to note any fixes (eg. resurfacing the milling platform).


*Milling platform is no longer level, thanks to the screws holding it down being loosened up. Needs resurfacing. 04/11/12
*Major upgrades in progress thanks to TJ. 01/22/13
 
*Platform still needs replacing, but Barlow resurfaced the remaining usable area. At least now it is level again. 07/10/12


*Someone accidentally resurfaced the milling platform (milled too deep). Now the platform needs replacing. 04/28/12
*Someone accidentally resurfaced the milling platform (milled too deep). Now the platform needs replacing. 04/28/12


*Platform still needs replacing, but Barlow resurfaced the remaining usable area. At least now it is level again. 07/10/12
*Milling platform is no longer level, thanks to the screws holding it down being loosened up. Needs resurfacing. 04/11/12

Revision as of 21:31, 22 January 2013

When something goes wrong, its nice to note it here. Also nice to note any fixes (eg. resurfacing the milling platform).

  • Major upgrades in progress thanks to TJ. 01/22/13
  • Platform still needs replacing, but Barlow resurfaced the remaining usable area. At least now it is level again. 07/10/12
  • Someone accidentally resurfaced the milling platform (milled too deep). Now the platform needs replacing. 04/28/12
  • Milling platform is no longer level, thanks to the screws holding it down being loosened up. Needs resurfacing. 04/11/12