Actions

CNC Mill Log: Difference between revisions

From HacDC Wiki

No edit summary
No edit summary
Line 5: Line 5:


*Someone accidentally resurfaced the milling platform (milled too deep). Now the platform needs replacing. 04/28/12
*Someone accidentally resurfaced the milling platform (milled too deep). Now the platform needs replacing. 04/28/12
*Platform still needs replacing, but Barlow resurfaced the remaining usable area. At least now it is level again. 07/10/12

Revision as of 01:36, 10 July 2012

When something goes wrong, its nice to note it here. Also nice to note any fixes (eg. resurfacing the milling platform).

  • Milling platform is no longer level, thanks to the screws holding it down being loosened up. Needs resurfacing. 04/11/12
  • Someone accidentally resurfaced the milling platform (milled too deep). Now the platform needs replacing. 04/28/12
  • Platform still needs replacing, but Barlow resurfaced the remaining usable area. At least now it is level again. 07/10/12