HacDC Spaceblimp 5: Difference between revisions
From HacDC Wiki
Hexagon5un (talk | contribs) |
Hexagon5un (talk | contribs) |
||
Line 23: | Line 23: | ||
* a video camera (Canon Zi6) | * a video camera (Canon Zi6) | ||
* a still camera (Canon Powershot A-480) running custom firmware to | * a still camera (Canon Powershot A-480) running custom firmware to get better exposures from space | ||
and a lot of instrumentation: | and a lot of instrumentation: |
Revision as of 18:46, 8 July 2011
Spaceblimp-5 Planned Launch: July 9, 2011
Summary
HacDC Spaceblimp 5 is set up for launch on Saturday morning 10:00 AM.
This time we're going for altitude. By using a larger balloon, hopefully it will burst at a higher altitude, 120k feet predicted.
Come join us for the launch, at ____.
Or follow along at home!
There are two radios on board the blimp that transmit out the GPS data:
- The primary radio is tied to the GPS and transmits out to a network of amateur radio enthusiasts who then pass the location information on to get mapped here: APRS.fi. We also are running some custom software that passes this data on to a Twitter account (once per minute!) which you can follow on your phone: DC Spaceblimp Primary Twitter Feed. (Click the link in the Twitter to pull up a map!)
- The secondary radio is actually a GSM cell phone module, and will broadcast its data when in range of a cell tower. It will be broadcasting both GPS data for tracking, and a lot of the sensor data for science. You can follow that Twitter feed through Society Of Robots Twitter Feed.
Payload
The payload contains a couple cameras:
- a video camera (Canon Zi6)
- a still camera (Canon Powershot A-480) running custom firmware to get better exposures from space
and a lot of instrumentation:
- a geiger counter
- 9 degree-of-freedom IMU (Inertial Measurement Unit on Wikipedia)
- high-speed (50 sample/sec) accelerometer
- internal and external temperature sensors
- humidity sensor
- air pressure sensor
- IR and visible light sensors
- a solar panel, hooked up to measure the voltage
Launch Plans
Planned launch date: | Saturday, July 9, 2011 |
---|---|
Launch time: | 10:00 AM, Launch should take less than an hour. |
Launch Location: |
|
Coordination/Talk-in: | 146.685 MHz simplex (this might change, please monitor Twitter (@HacDCSpaceblimp) and mailing list for updates. |
Planned Altitude: | 120,000 Feet |
Planned Ascent Rate: | 1,000 feet/minute |
Planned Descent Rate: | 1,000 feet/minute |
Primary Beacon: | Son-of-WhereAVR with ublox GPS. Yaesu VX-1 handi-talkie with 1 W Transmitter, call sign W3HAC-11 (map), Frequency 144.390 MHz |
Secondary Beacon: | GSM mobile phone modue, uBlox GPS |
Payload: | 9 DOF IMU, Geiger counter, temperature, pressure, humidity, and light sensors |
[email protected] |
Subscribe to the Spaceblimp email list |