Machine Shop Classes: Difference between revisions
From HacDC Wiki
(Created page with "This page is a work in progress. I honestly don't really know what I'm doing with Wiki, so I could use some help. -Tom C. (10/13/10)") |
No edit summary |
||
| Line 1: | Line 1: | ||
This page is | [[Category:Ongoing_Projects]] | ||
This page is for the machine shop classes for the space. Currently basic lathe classes are being taught, but this may expand to include other classes/tools as they become available. | |||
==Resources== | |||
'''Further Reading''' | |||
[http://manuals.harborfreight.com/manuals/93000-93999/93212.pdf Lathe Instruction Manual] | |||
[http://techtv.mit.edu/collections/ehs-videos/videos/144-machine-shop-8 MIT Lathe Instruction Videos] | |||
'''Material Sources''' | |||
[http://wiki.hacdc.org/index.php/Suppliers#Mechanical_Parts_.26_Fabrication HacDC Wiki Page: Suppliers] | |||
[http://www.mcmaster.com/ McMaster-Carr] | |||
[http://www.sciplus.com/search.cfm/scategory/TAM/term/calipers/srch.fp/1 American Science and Surplus $20 Digital Calipers] | |||
==Lessons Learned== | |||
List of tips gleaned from our own <del>mistakes</del> experiences. | |||
Please contribute! (with attribution / date) | |||
*The speed settings from the classes are suggestions only. When in doubt, sacrifice a small test piece to fiddle with speeds (both motor speed and hand speed) and find the optimal settings. (Tom C. 10/13/10) | |||
*When boring, it's much easier to stand at the END of the machine (so you're looking down the axis of the part) than to stand "in front" where you'd normally think to. (Tom C. 10/13/10) | |||
*Don't be afraid to use both hands on the dials. They're small, but two hands will give better control and smoother finishes. (Tom C. 10/13/10) | |||
Revision as of 14:44, 13 October 2010
This page is for the machine shop classes for the space. Currently basic lathe classes are being taught, but this may expand to include other classes/tools as they become available.
Resources
Further Reading
Material Sources
American Science and Surplus $20 Digital Calipers
Lessons Learned
List of tips gleaned from our own mistakes experiences.
Please contribute! (with attribution / date)
- The speed settings from the classes are suggestions only. When in doubt, sacrifice a small test piece to fiddle with speeds (both motor speed and hand speed) and find the optimal settings. (Tom C. 10/13/10)
- When boring, it's much easier to stand at the END of the machine (so you're looking down the axis of the part) than to stand "in front" where you'd normally think to. (Tom C. 10/13/10)
- Don't be afraid to use both hands on the dials. They're small, but two hands will give better control and smoother finishes. (Tom C. 10/13/10)