Inventory-space: Difference between revisions
From HacDC Wiki
m (fix typo) |
Ubuntourist (talk | contribs) (DON'T unformat this!) |
||
| Line 1: | Line 1: | ||
(items in () are more or less temporary) | (items in () are more or less temporary) | ||
North | |||
Speaker: Tannoy B50 | === North === | ||
Light: 8 bulb | |||
Speaker: iMode iP1500 4 ohm 5W (outgo?) | * Speaker: Tannoy B50 | ||
Smoke detector, photoelectric: Ademco 5808LST (uses 2 CR123A batteries) (outgo?) | * Light: 8 bulb | ||
Magnetic stirrer: Home Science Tools CE-HOTSTIR | * Speaker: iMode iP1500 4 ohm 5W (outgo?) | ||
Centrifuge: Drucker 611 T | * Smoke detector, photoelectric: Ademco 5808LST (uses 2 CR123A batteries) (outgo?) | ||
Microscope: Tasco 1200 | * Magnetic stirrer: Home Science Tools CE-HOTSTIR | ||
Monitor stand (outgo?) | * Centrifuge: Drucker 611 T | ||
Video microscope: AmScope | * Microscope: Tasco 1200 | ||
Five Channel Home Theater System: dynaco QD-1 series 11L (outgo?) | * Monitor stand (outgo?) | ||
Box of CFL bulbs: Plusrite CFQ13W/GX23/841 (outgo? (recycle, contains Hg)) | * Video microscope: AmScope | ||
Speaker: Tannoy B50 | * Five Channel Home Theater System: dynaco QD-1 series 11L (outgo?) | ||
Spaceblimp bin 1 | * Box of CFL bulbs: Plusrite CFQ13W/GX23/841 (outgo? (recycle, contains Hg)) | ||
Box of CRISPR supplies (outgo?) | * Speaker: Tannoy B50 | ||
Spaceblimp bin 2 | * Spaceblimp bin 1 | ||
12-inch Nonstick Electric Skillet: Chefmate (labeled Not For Food) (outgo?) | * Box of CRISPR supplies (outgo?) | ||
SEM Operating Instructions binder | * Spaceblimp bin 2 | ||
Router: D-Link AC750 DIR-817LW | * 12-inch Nonstick Electric Skillet: Chefmate (labeled Not For Food) (outgo?) | ||
Gigabit swtich: TP-Link TL-SG1008D | * SEM Operating Instructions binder | ||
Gigabit switch: Linksys | * Router: D-Link AC750 DIR-817LW | ||
SEM parts bin | * Gigabit swtich: TP-Link TL-SG1008D | ||
PCB fabrication bin | * Gigabit switch: Linksys | ||
Constant Temperature Water Bath | * SEM parts bin | ||
Jug of HCl (take to basement or put on floor) | * PCB fabrication bin | ||
Hot Stone Spa Therapy System: Conair HR10A (OUTGO!) | * Constant Temperature Water Bath | ||
CRC QD Electronic Cleaner spray can (labeled DO NOT USE HAZARD) (OUTGO!) | * Jug of HCl (take to basement or put on floor) | ||
Box with OS DVDs (outgo?) | * Hot Stone Spa Therapy System: Conair HR10A (OUTGO!) | ||
Can of Byzantium drives | * CRC QD Electronic Cleaner spray can (labeled DO NOT USE HAZARD) (OUTGO!) | ||
Hot pot: ProctorSilex K4077 (outgo?) | * Box with OS DVDs (outgo?) | ||
Air purifier | * Can of Byzantium drives | ||
(CO2 meter) | * Hot pot: ProctorSilex K4077 (outgo?) | ||
(CO detector) | * Air purifier | ||
3D printer: Mini (works) | * (CO2 meter) | ||
Cordless phone: Uniden EX18560 | * (CO detector) | ||
VOIP: Linksys VOIP Voice | * 3D printer: Mini (works) | ||
Gigabit router: TP-Link AC1750 | * Cordless phone: Uniden EX18560 | ||
Microwave oven: Emerson (works except for clock digit) | * VOIP: Linksys VOIP Voice | ||
3D printer: (2nd) Taz (never worked) | * Gigabit router: TP-Link AC1750 | ||
3D printer computer: Dell Optiplex 760 | * Microwave oven: Emerson (works except for clock digit) | ||
3D printer: Rostock (needs extruder mount) | * 3D printer: (2nd) Taz (never worked) | ||
Fire extinguisher: Kidde (recommend moving) | * 3D printer computer: Dell Optiplex 760 | ||
3D printer: Monoprice (works) | * 3D printer: Rostock (needs extruder mount) | ||
Coffee maker: Sunbeam | * Fire extinguisher: Kidde (recommend moving) | ||
East | * 3D printer: Monoprice (works) | ||
2 air conditioners: Frigidaire | * Coffee maker: Sunbeam | ||
Video screen | |||
DC power outlets: MFJ MFJ-1128 | === East === | ||
Audio unit: Focal Power Bird | |||
Digital repeater: DR-1X | * 2 air conditioners: Frigidaire | ||
Duplexer: Phelps Dodge 696 | * Video screen | ||
AV surround receiver: Denon AVR-1908 | * DC power outlets: MFJ MFJ-1128 | ||
Power amp: Crown CP660 | * Audio unit: Focal Power Bird | ||
Function generator: HP 3312A | * Digital repeater: DR-1X | ||
Unidentified unit: Swan | * Duplexer: Phelps Dodge 696 | ||
Unidentified unit: Swan | * AV surround receiver: Denon AVR-1908 | ||
Unidentified unit | * Power amp: Crown CP660 | ||
Radio equipment: Echophone Commercial | * Function generator: HP 3312A | ||
Power supply: Astron RS-50M | * Unidentified unit: Swan | ||
Amp: Elecraft KPA1500 | * Unidentified unit: Swan | ||
Autotuner: LDG Electronics YT-1200 | * Unidentified unit | ||
Transceiver: Yaesu FT-991 | * Radio equipment: Echophone Commercial | ||
Direction control: hy-gain | * Power supply: Astron RS-50M | ||
Power supply: Elecraft KPA1500 | * Amp: Elecraft KPA1500 | ||
2 FRS/GMRS radios: Cobra microTALK | * Autotuner: LDG Electronics YT-1200 | ||
TV computer: LG Sharkoon | * Transceiver: Yaesu FT-991 | ||
Gigabit switch: D-Link DGS-1005D | * Direction control: hy-gain | ||
Video camera: XBOX 360 | * Power supply: Elecraft KPA1500 | ||
Voltage regulator: Seven Star AR-5000 | * 2 FRS/GMRS radios: Cobra microTALK | ||
Video game controllers (many) | * TV computer: LG Sharkoon | ||
Monitor | * Gigabit switch: D-Link DGS-1005D | ||
VR headset | * Video camera: XBOX 360 | ||
Computer | * Voltage regulator: Seven Star AR-5000 | ||
SEM | * Video game controllers (many) | ||
South | * Monitor | ||
Speaker: Tannoy B50 (assumed) | * VR headset | ||
Power supply: Power Mate Corp. PXS-C-5-V | * Computer | ||
Monitor: Lenovo | * SEM | ||
Printer: IBM 4312 | |||
Tripod | === South === | ||
4 speakers: JBL | |||
Bin labeled John Pancoast W3HAC | * Speaker: Tannoy B50 (assumed) | ||
Light: 12V LED | * Power supply: Power Mate Corp. PXS-C-5-V | ||
Speaker: Tannoy B50 (assumed) | * Monitor: Lenovo | ||
Microscope: Tasco | * Printer: IBM 4312 | ||
Pulse generator: Wavetek 601 | * Tripod | ||
Oscilloscope: COS6150 | * 4 speakers: JBL | ||
Tabletop computers | * Bin labeled John Pancoast W3HAC | ||
(Monitor: MultiSync 1980SX) | * Light: 12V LED | ||
(Monitor: Lenovo ThinkVision) | * Speaker: Tannoy B50 (assumed) | ||
(Speaker: Evolution TS5500) | * Microscope: Tasco | ||
Laser cutter | * Pulse generator: Wavetek 601 | ||
Fire extinguisher: Kidde (RECALLED - call Kidde to get it replaced free) | * Oscilloscope: COS6150 | ||
Oscilloscope: Tektronix TDS 224 | * Tabletop computers | ||
Soldering system: Aoyue Int 2738A | * (Monitor: MultiSync 1980SX) | ||
Power supply: HQ Power PS1503SBU | * (Monitor: Lenovo ThinkVision) | ||
Power supply: Kepco MPS 620M | * (Speaker: Evolution TS5500) | ||
Soldering iron: Weller WES51 | * Laser cutter | ||
Soldering iron: Weller WSM 1C | * Fire extinguisher: Kidde (RECALLED - call Kidde to get it replaced free) | ||
Soldering iron: Therm-o-trac 1002 | * Oscilloscope: Tektronix TDS 224 | ||
West | * Soldering system: Aoyue Int 2738A | ||
Video microscope: Sony | * Power supply: HQ Power PS1503SBU | ||
3D printer: Ultimaker | * Power supply: Kepco MPS 620M | ||
(Computer: ASUS Eee Box (old 3D printer)) | * Soldering iron: Weller WES51 | ||
(Printer computer (not working, will not boot up)) | * Soldering iron: Weller WSM 1C | ||
Printer/copier: Brother DCP8060 (works) | * Soldering iron: Therm-o-trac 1002 | ||
(Monitor) | |||
Renderadmin computer | === West === | ||
Gigabit switch: Netgear GSS116E | |||
Refrigerator | * Video microscope: Sony | ||
(belt sander) | * 3D printer: Ultimaker | ||
Magnetic sweeper | * (Computer: ASUS Eee Box (old 3D printer)) | ||
Stepladder | * (Printer computer (not working, will not boot up)) | ||
* Printer/copier: Brother DCP8060 (works) | |||
* (Monitor) | |||
* Renderadmin computer | |||
* Gigabit switch: Netgear GSS116E | |||
* Refrigerator | |||
* (belt sander) | |||
* Magnetic sweeper | |||
* Stepladder | |||
Revision as of 01:40, 18 February 2020
(items in () are more or less temporary)
North
- Speaker: Tannoy B50
- Light: 8 bulb
- Speaker: iMode iP1500 4 ohm 5W (outgo?)
- Smoke detector, photoelectric: Ademco 5808LST (uses 2 CR123A batteries) (outgo?)
- Magnetic stirrer: Home Science Tools CE-HOTSTIR
- Centrifuge: Drucker 611 T
- Microscope: Tasco 1200
- Monitor stand (outgo?)
- Video microscope: AmScope
- Five Channel Home Theater System: dynaco QD-1 series 11L (outgo?)
- Box of CFL bulbs: Plusrite CFQ13W/GX23/841 (outgo? (recycle, contains Hg))
- Speaker: Tannoy B50
- Spaceblimp bin 1
- Box of CRISPR supplies (outgo?)
- Spaceblimp bin 2
- 12-inch Nonstick Electric Skillet: Chefmate (labeled Not For Food) (outgo?)
- SEM Operating Instructions binder
- Router: D-Link AC750 DIR-817LW
- Gigabit swtich: TP-Link TL-SG1008D
- Gigabit switch: Linksys
- SEM parts bin
- PCB fabrication bin
- Constant Temperature Water Bath
- Jug of HCl (take to basement or put on floor)
- Hot Stone Spa Therapy System: Conair HR10A (OUTGO!)
- CRC QD Electronic Cleaner spray can (labeled DO NOT USE HAZARD) (OUTGO!)
- Box with OS DVDs (outgo?)
- Can of Byzantium drives
- Hot pot: ProctorSilex K4077 (outgo?)
- Air purifier
- (CO2 meter)
- (CO detector)
- 3D printer: Mini (works)
- Cordless phone: Uniden EX18560
- VOIP: Linksys VOIP Voice
- Gigabit router: TP-Link AC1750
- Microwave oven: Emerson (works except for clock digit)
- 3D printer: (2nd) Taz (never worked)
- 3D printer computer: Dell Optiplex 760
- 3D printer: Rostock (needs extruder mount)
- Fire extinguisher: Kidde (recommend moving)
- 3D printer: Monoprice (works)
- Coffee maker: Sunbeam
East
- 2 air conditioners: Frigidaire
- Video screen
- DC power outlets: MFJ MFJ-1128
- Audio unit: Focal Power Bird
- Digital repeater: DR-1X
- Duplexer: Phelps Dodge 696
- AV surround receiver: Denon AVR-1908
- Power amp: Crown CP660
- Function generator: HP 3312A
- Unidentified unit: Swan
- Unidentified unit: Swan
- Unidentified unit
- Radio equipment: Echophone Commercial
- Power supply: Astron RS-50M
- Amp: Elecraft KPA1500
- Autotuner: LDG Electronics YT-1200
- Transceiver: Yaesu FT-991
- Direction control: hy-gain
- Power supply: Elecraft KPA1500
- 2 FRS/GMRS radios: Cobra microTALK
- TV computer: LG Sharkoon
- Gigabit switch: D-Link DGS-1005D
- Video camera: XBOX 360
- Voltage regulator: Seven Star AR-5000
- Video game controllers (many)
- Monitor
- VR headset
- Computer
- SEM
South
- Speaker: Tannoy B50 (assumed)
- Power supply: Power Mate Corp. PXS-C-5-V
- Monitor: Lenovo
- Printer: IBM 4312
- Tripod
- 4 speakers: JBL
- Bin labeled John Pancoast W3HAC
- Light: 12V LED
- Speaker: Tannoy B50 (assumed)
- Microscope: Tasco
- Pulse generator: Wavetek 601
- Oscilloscope: COS6150
- Tabletop computers
- (Monitor: MultiSync 1980SX)
- (Monitor: Lenovo ThinkVision)
- (Speaker: Evolution TS5500)
- Laser cutter
- Fire extinguisher: Kidde (RECALLED - call Kidde to get it replaced free)
- Oscilloscope: Tektronix TDS 224
- Soldering system: Aoyue Int 2738A
- Power supply: HQ Power PS1503SBU
- Power supply: Kepco MPS 620M
- Soldering iron: Weller WES51
- Soldering iron: Weller WSM 1C
- Soldering iron: Therm-o-trac 1002
West
- Video microscope: Sony
- 3D printer: Ultimaker
- (Computer: ASUS Eee Box (old 3D printer))
- (Printer computer (not working, will not boot up))
- Printer/copier: Brother DCP8060 (works)
- (Monitor)
- Renderadmin computer
- Gigabit switch: Netgear GSS116E
- Refrigerator
- (belt sander)
- Magnetic sweeper
- Stepladder