Float-switch-base.stl: Difference between revisions
From HacDC Wiki
(added category) |
(James uploaded a new version of "File:Float-switch-base.stl": Version 3. Shortened thread sockets to 5 threads. Added inlet chamfer to threads. Added 0.5mm diameter tolerance to threads.) |
(No difference)
| |
Revision as of 03:38, 8 May 2017
Base of cooling water level float switch. Needs 1/4-20 all thread legs, or I could redesign it to use two packs of chopsticks. Version 2.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 05:12, 10 May 2017 | (32.91 MB) | James (talk | contribs) | v5 update to adjust screw threads |
| 03:38, 8 May 2017 | (22.89 MB) | James (talk | contribs) | Version 3. Shortened thread sockets to 5 threads. Added inlet chamfer to threads. Added 0.5mm diameter tolerance to threads. | |
| 21:26, 1 May 2017 | (37.1 MB) | James (talk | contribs) | Base of cooling water level float switch. Needs 1/4-20 all thread legs, or I could redesign it to use two packs of chopsticks. Version 2. |
You cannot overwrite this file.
File usage
The following page uses this file: