Nebula: Difference between revisions
From HacDC Wiki
(→Login) |
|||
Line 89: | Line 89: | ||
Dell 1850 | Dell 1850 | ||
* CPU - Dual Processor, Quad-Core | * CPU - Dual Processor, Quad-Core | ||
* RAM - | * RAM - 8GB ECC | ||
* HDD - 100GB SAS RAID1 | * HDD - 100GB SAS RAID1 | ||
* Hostname - HacDC-shared-m335-3 | * Hostname - HacDC-shared-m335-3 |
Revision as of 01:58, 13 March 2017
Simple project server, likely successor to Shimmer. Emphasis on high-availability.
For discussion purposes, server is nicknamed "Nebula".
ChiefAdmins
- Matthew "mirage335" Hines
Support
#hacdc on irc.freenode.net (or via chat.hacdc.org)
Login
On any unix terminal emulator, enter the command:
ssh <userName>@nebula.srv.hacdc.org -p 2222
On other platforms, try applications like PuTTY with similar settings. Local connections (within HacDC's network) will need to use IP address .
Recommendations
Consider using Nebula as a fallback for mission-critical lightweight services hosted on Starlight (eg. MediaWiki, git, etc).
CommandReference
Routinely important commands unique to this server documented as follows.
Root (Admin)
ReInstall
- apt-get install xen-linux-system xen-tools git sudo
- dpkg-divert --divert /etc/grub.d/08_linux_xen --rename /etc/grub.d/20_linux_xen
- Installation of hostedXen .
hostedXen
- ./hxNewUser <userName> # Creates user account with default Xen VM and permissions.
- ./hxDelUser <userName> # Deletes user account, associated VMs, and associated Xen permissions.
- ./hxNewVM <userName> <VM_Number> <dist> # Creates VM accessible to non-root user <userName> .
Autostart
Through normal reboots, host will suspend/resume any guest VMs. If that is insufficient, the correct way to enable autostarting is through the xm command, documented as method 2 here.
iptables
Investigation
- iptables -t nat -L -n -v #Lists port forwarding rules.
- iptables -t nat -F #Deletes port forwarding rules.
- iptables -D PREROUTING 1 #Deletes port forwarding rule.
Forwarding
Enable
/sbin/iptables -P FORWARD ACCEPT /sbin/iptables --table nat -A POSTROUTING -o eth0 -j MASQUERADE
Specific
/sbin/iptables -t nat -A PREROUTING -p tcp -i eth0 --dport 20283 -j DNAT --to 10.174.10.5:22
Persistent
Package iptables-persistent has been installed. Upon installation, existing iptables rules were saved. Edit /etc/iptables/rules.v4 .
Users
Please note, your virtual machine has most likely been created with a root password identical to your account, but will require, through the console, manually enabling root SSH login.
List
List Xen VMs created for you.
cat ~/xenList
Startup
Start Xen VM, and launch console.
sudo /usr/sbin/xl create -c /etc/xen/<name>.cfg #Escape with Ctrl+] .
Just start Xen VM. Useful if planning to interact through other means (ie. network).
sudo /usr/sbin/xl create /etc/xen/<name>.cfg
Shutdown
Yes, really, hard shutdown is termed "destroy". Don't worry, not synonymous with "delete".
sudo /usr/sbin/xl destroy <name>
Console
Opens the console of running VM <name> .
sudo /usr/sbin/xl console <name> #Escape with Ctrl+] .
Characteristics
Dell 1850
- CPU - Dual Processor, Quad-Core
- RAM - 8GB ECC
- HDD - 100GB SAS RAID1
- Hostname - HacDC-shared-m335-3
- FQDN - HacDC-shared-m335-3.srv.hacdc.org
Redundancy (RAID)
Root filesystem is comprised of two approximately 100GB HDDs.
Chasis supports second redundant power supply, to be installed when available.
Policies
Permissions
Root
HacDC members with a demonstrable need or willingness to manage non-root users may be given root access. Imperative that root users do not jeopardize uptime.
Shell
All HacDC members are welcome to non-root shell accounts, directly provided by the server.
Xen
All HacDC members are welcome to Xen Virtual Machines. Resources, including CPU, disk space, and external network ports, will be allocated on an as-needed first-come-first-serve basis.
Root users, please use the provided hostedXen scripts. Following the naming conventions set therein helps account for which resources belong to whom.
Notifications
Internal server email will notify users, if feasible, on the following schedules, subject to change.
- Three days before planned downtime exceeding one hour.
- One week before planned permanent downtime (obsolescence).
Forwarding to another email address is possible with the following command.
echo '[email protected]' > ~/.forward
Removal
- Up to three months before removal of ex-member accounts. Exceptions on a case-by-case basis.
- Compromised accounts will be immediately removed or disabled as discovered.
- Excessive resource use, including disk space consumption, may be terminated, particularly if account holder is not responsive to inquiries.
DataLoss
- Failure of both disks will result in unrecoverable loss of data on this server.
- Removed accounts or terminated services may result in immediate, permanent deletion.
- As array repair procedures are rarely done, catastrophic mistakes are possible.
Privacy
Machine is security is not especially tight. Sysadmins may investigate possible abuse. Privacy may exist, but is not a reasonable expectation.
AcceptableUse
Disk
Vast quantities of disk space are available. Still, please be considerate, and understand that on-mission HacDC activities may be given priority.
Sharing
Sharing of account resources is permitted, however, additional resources will be allocated according to individual member needs for specific purposes. As a reminder, compromised accounts will be immediately removed or disabled as discovered.
Bandwidth
Although HacDC has a high-capacity 175/15Mbit link, it is shared with other tenants. Please be courteous. If internet bandwidth use is required for downloading large files, between 2200EDT and 0600EDT is best.
Hard bandwidth limits have not been set to ease administration of local file servers. However, please configure applications to limit maximum bandwidth use where possible, particularly for web servers.
- NOTE: If your bandwidth use is too high during normal hours, the church administrator will cut bandwidth available to the whole subnet and will call mirage335, juri_, Ethan Waldo, or other admin team members to resolve the issue (no one will be happy).
Special Services
HTTP/HTTPs
Ports 80/443 are available through reverse proxy. Please setup a relevant domain name (eg. *.member.hacdc.org) through FreeDNS or other service, and contact the HacDC admin team for assistance.
Backup
Periodic backup to server Starlight may be performed by admins.
NamingConvention
Preferred network names for participating machines and virtual machines.
Physical
Hostnames
HacDC-shared-m335-2
- HacDC - Identifies machine as HacDC or HacDC member property on the local network.
- shared - One of private, restricted, shared. Private = one member only (eg. RasPi). Restricted = limited access (eg. HacDC web server). Shared = shared resources (ie. remote shells).
- m335 - Abbreviated member name or screen name. Full contact details should be written on the physical machine.
- 1 - Unique identifier.
FQDNs
HacDC-shared-m335-2.router.hacdc.org
Virtual
Hostnames
mirage335-1
- mirage335 - Local username.
- 1 - Unique machine identifier.
FQDNs
mirage335-1.HacDC-shared-m335-2.router.hacdc.org
Timezone
EST/EDT aka US Eastern, America/NewYork, or "Eastern"
Workarounds
SSH KeepAlive
Due to limited bandwidth, SSH sessions may freeze. To prevent this, consider the following to configuration, appended to client-side ~/.ssh/config .
Host * ServerAliveInterval 30
Recovery
MAW3147NC hard disks are available at reasonable cost from eBay.
Disclaimer
No guarantees. Admins are expected to make best efforts toward reliability, security, and privacy. Monitoring may include without limitation system health, resource consumption, and authentication failures, and the like. More intrusive monitoring, such as of user filesystems, should be avoided if possible.
Excepting the case, reasonably requsitioned as a supply, the server is property of mirage335 and Julia Longtin. Administration is at their discretion.
Substantial personal investments were put into this server. Misuse will be taken as a severe disappointment.
Credits
Hardware donor.