Actions

Laser Cutter Operators Log: Difference between revisions

From HacDC Wiki

No edit summary
m (Gatohaus moved page LaserCutterOperatorsLog to Laser Cutter Operators Log: camelecase page name complicates search success)
 
(No difference)

Latest revision as of 17:49, 16 February 2014


When you use the Laser Cutter, please add notes here. Newest at top.

  • 18 Oct 2013: User: rob experimented with engraving some black-and-white images on acrylic and cut some acrylic for a project. The Full Spectrum LLC print driver just gave me error messages and I couldn't figure out the problem, so I just converted my images to BMP and that worked fine. It may be of interest that I have found that cutting 0.177" thick acrylic reliably takes 10-11 passes at 100% power, 100% speed. 10 passes leaves some small chads at the edges that are brushed off pretty easily; 11 generally cuts it clean.
  • User:Haxwithaxe made acrylic PentaGo board parts. design. i forgot to record the time used.
    • i used some of the red plastic that was next to the table and it made sort of a cotton candy like material when lased so we might want to figure out what it is exactly.