Actions

Inventory-space: Difference between revisions

From HacDC Wiki

m (VOIP)
(Added power supply manual)
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<nowiki>
(items in () are more or less temporary)
(items in () are more or less temporary)
North
 
Speaker: Tannoy B50
=== North ===
Light: 8 bulb
 
Speaker: iMode iP1500 4 ohm 5W (outgo?)
* Speaker: Tannoy B50
Smoke detector, photoelectric: Ademco 5808LST (uses 2 CR123A batteries) (outgo?)
* Light: 8 bulb
Magnetic stirrer: Home Science Tools CE-HOTSTIR
* Speaker: iMode iP1500 4 ohm 5W (outgo?)
Centrifuge: Drucker 611 T
* Smoke detector, photoelectric: Ademco 5808LST (uses 2 CR123A batteries) (outgo?)
Microscope: Tasco 1200
* Magnetic stirrer: Home Science Tools CE-HOTSTIR
Monitor stand (outgo?)
* Centrifuge: Drucker 611 T
Video microscope: AmScope
* Microscope: Tasco 1200
Five Channel Home Theater System: dynaco QD-1 series 11L (outgo)
* Monitor stand (outgo?)
Box of CFL bulbs: Plusrite CFQ13W/GX23/841 (outgo? (recycle, contains Hg))
* Video microscope: AmScope
Speaker: Tannoy B50
* Five Channel Home Theater System: dynaco QD-1 series 11L (outgo?)
Spaceblimp bin 1
* Box of CFL bulbs: Plusrite CFQ13W/GX23/841 (outgo? (recycle, contains Hg))
Box of CRISPR supplies (outgo?)
* Speaker: Tannoy B50
Spaceblimp bin 2
* Spaceblimp bin 1
12-inch Nonstick Electric Skillet: Chefmate (labeled Not For Food) (outgo?)
* Box of CRISPR supplies (outgo?)
SEM Operating Instructions binder
* Spaceblimp bin 2
Router: D-Link AC750 DIR-817LW
* 12-inch Nonstick Electric Skillet: Chefmate (labeled Not For Food) (outgo?)
Gigabit swtich: TP-Link TL-SG1008D
* SEM Operating Instructions binder
Gigabit switch: Linksys  
* Router: D-Link AC750 DIR-817LW
SEM parts bin
* Gigabit swtich: TP-Link TL-SG1008D
PCB fabrication bin
* Gigabit switch: Linksys  
Constant Temperature Water Bath
* SEM parts bin
Jug of HCl (take to basement or put on floor)
* PCB fabrication bin
Hot Stone Spa Therapy System: Conair HR10A (OUTGO!)
* Constant Temperature Water Bath
CRC QD Electronic Cleaner spray can (labeled DO NOT USE  HAZARD) (OUTGO!)
* Jug of HCl (take to basement or put on floor)
Box with OS DVDs (outgo?)
* Hot Stone Spa Therapy System: Conair HR10A (OUTGO!)
Can of Byzantium drives
* CRC QD Electronic Cleaner spray can (labeled DO NOT USE  HAZARD) (OUTGO!)
Hot pot: ProctorSilex K4077 (outgo?)
* Box with OS DVDs (outgo?)
Air purifier
* Can of Byzantium drives
(CO2 meter)
* Hot pot: ProctorSilex K4077 (outgo?)
(CO detector)
* Air purifier
3D printer: Mini (works)
* (CO2 meter)
Cordless phone: Uniden EX18560
* (CO detector)
VOIP: Linksys VOIP Voice
* 3D printer: Mini (works)
Gigabit router: TP-Link AC1750
* Cordless phone: Uniden EX18560
Microwave oven: Emerson (works except for clock digit)
* VOIP: Linksys VOIP Voice
3D printer: (2nd) Taz (never worked)
* Gigabit router: TP-Link AC1750
3D printer computer: Dell Optiplex 760
* Microwave oven: Emerson (works except for clock digit)
3D printer: Rostock (needs extruder mount)
* 3D printer: (2nd) Taz (never worked)
Fire extinguisher: Kidde (recommend moving)
* 3D printer computer: Dell Optiplex 760
3D printer: Monoprice (works)
* 3D printer: Rostock (needs extruder mount)
Coffee maker: Sunbeam
* Fire extinguisher: Kidde (recommend moving)
East
* 3D printer: Monoprice (works)
2 air conditioners: Frigidaire
* Coffee maker: Sunbeam
Video screen
 
DC power outlets: MFJ MFJ-1128
=== East ===
Audio unit: Focal Power Bird
 
Digital repeater: DR-1X
* 2 air conditioners: Frigidaire
Duplexer: Phelps Dodge 696
* Video screen
AV surround receiver: Denon AVR-1908
* DC power outlets: MFJ MFJ-1128
Power amp: Crown CP660
* Audio unit: Focal Power Bird
Function generator: HP 3312A
* Digital repeater: DR-1X
Unidentified unit: Swan
* Duplexer: Phelps Dodge 696
Unidentified unit: Swan
* AV surround receiver: Denon AVR-1908
Unidentified unit
* Power amp: Crown CP660
Radio equipment: Echophone Commercial
* Function generator: HP 3312A
Power supply: Astron RS-50M
* Unidentified unit: Swan
Amp: Elecraft KPA1500
* Unidentified unit: Swan
Autotuner: LDG Electronics YT-1200
* Unidentified unit
Transceiver: Yaesu FT-991
* Radio equipment: Echophone Commercial
Direction control: hy-gain
* Power supply: Astron RS-50M
Power supply: Elecraft KPA1500
* Amp: Elecraft KPA1500
2 FRS/GMRS radios: Cobra microTALK
* Autotuner: LDG Electronics YT-1200
TV computer: LG Sharkoon
* Transceiver: Yaesu FT-991
Gigabit switch: D-Link DGS-1005D
* Direction control: hy-gain
Video camera: XBOX 360
* Power supply: Elecraft KPA1500
Voltage regulator: Seven Star AR-5000
* 2 FRS/GMRS radios: Cobra microTALK
Video game controllers (many)
* TV computer: LG Sharkoon
Monitor
* Gigabit switch: D-Link DGS-1005D
VR headset
* Video camera: XBOX 360
Computer
* Voltage regulator: Seven Star AR-5000
SEM
* Video game controllers (many)
South
* Monitor
Speaker: Tannoy B50 (assumed)
* VR headset
Power supply: Power Mate Corp. PXS-C-5-V
* Computer
Monitor: Lenovo
* SEM
Printer: IBM 4312
 
Tripod
=== South ===
4 speakers: JBL
 
Bin labeled John Pancoast W3HAC
* Speaker: Tannoy B50 (assumed)
Light: 12V LED
* Power supply: Power Mate Corp. PXS-C-5-V
Speaker: Tannoy B50 (assumed)
* Monitor: Lenovo
Microscope
* Printer: IBM 4312
Pulse generator: Wavetek 601
* Tripod
Oscilloscope: COS6150
* 4 speakers: JBL
Tabletop computers
* Bin labeled John Pancoast W3HAC
(Monitor: MultiSync 1980SX)
* Light: 12V LED
(Monitor: Lenovo ThinkVision)
* Speaker: Tannoy B50 (assumed)
(Speaker: Evolution TS5500)
* Microscope: Tasco
Laser cutter
* Pulse generator: [[:File:Wavetek Model 801 50MHz Pulse Generator.djvu|Wavetek Model 801 (50MHz)]]
Oscilloscope: Tektronix TDS 224
* Oscilloscope: COS6150
Soldering system: Aoyue Int 2738A
* Tabletop computers
Power supply: HQ Power PS1503SBU
* (Monitor: MultiSync 1980SX)
Power supply: Kepco MPS 620M
* (Monitor: Lenovo ThinkVision)
Soldering iron: Weller WES51
* (Speaker: Evolution TS5500)
Soldering iron: Weller WSM 1C
* Laser cutter
Soldering iron: Therm-o-trac 1002
* Fire extinguisher: Kidde (RECALLED - call Kidde to get it replaced free)
West
* Oscilloscope: [[:File:Tektronix-TDS-224.djvu|Tektronix TDS 224]]
Video microscope: Sony
* Soldering system: Aoyue Int 2738A
3D printer: Ultimaker
* Power supply: [[:File:Velleman-HQ-PS1503SBU.djvu|Velleman HQ Power PS1503SBU]]
(Computer: old 3D printer)
* Power supply: Kepco MPS 620M
(Printer computer (not working, will not boot up))
* Soldering iron: Weller WES51
Printer/copier: Brother DCP8060 (works)
* Soldering iron: Weller WSM 1C
(Monitor)
* Soldering iron: Therm-o-trac 1002
Renderadmin computer
 
Gigabit switch: Netgear GSS116E
=== West ===
Refrigerator
 
(belt sander)
* Video microscope: Sony
Magnetic sweeper
* 3D printer: Ultimaker
Stepladder
* (Computer: ASUS Eee Box (old 3D printer))
</nowiki>
* (Printer computer (not working, will not boot up))
* Printer/copier: Brother DCP8060 (works)
* (Monitor)
* Renderadmin computer
* Gigabit switch: Netgear GSS116E
* Refrigerator
* (belt sander)
* Magnetic sweeper
* Stepladder

Latest revision as of 00:07, 10 March 2020

(items in () are more or less temporary)

North

  • Speaker: Tannoy B50
  • Light: 8 bulb
  • Speaker: iMode iP1500 4 ohm 5W (outgo?)
  • Smoke detector, photoelectric: Ademco 5808LST (uses 2 CR123A batteries) (outgo?)
  • Magnetic stirrer: Home Science Tools CE-HOTSTIR
  • Centrifuge: Drucker 611 T
  • Microscope: Tasco 1200
  • Monitor stand (outgo?)
  • Video microscope: AmScope
  • Five Channel Home Theater System: dynaco QD-1 series 11L (outgo?)
  • Box of CFL bulbs: Plusrite CFQ13W/GX23/841 (outgo? (recycle, contains Hg))
  • Speaker: Tannoy B50
  • Spaceblimp bin 1
  • Box of CRISPR supplies (outgo?)
  • Spaceblimp bin 2
  • 12-inch Nonstick Electric Skillet: Chefmate (labeled Not For Food) (outgo?)
  • SEM Operating Instructions binder
  • Router: D-Link AC750 DIR-817LW
  • Gigabit swtich: TP-Link TL-SG1008D
  • Gigabit switch: Linksys
  • SEM parts bin
  • PCB fabrication bin
  • Constant Temperature Water Bath
  • Jug of HCl (take to basement or put on floor)
  • Hot Stone Spa Therapy System: Conair HR10A (OUTGO!)
  • CRC QD Electronic Cleaner spray can (labeled DO NOT USE HAZARD) (OUTGO!)
  • Box with OS DVDs (outgo?)
  • Can of Byzantium drives
  • Hot pot: ProctorSilex K4077 (outgo?)
  • Air purifier
  • (CO2 meter)
  • (CO detector)
  • 3D printer: Mini (works)
  • Cordless phone: Uniden EX18560
  • VOIP: Linksys VOIP Voice
  • Gigabit router: TP-Link AC1750
  • Microwave oven: Emerson (works except for clock digit)
  • 3D printer: (2nd) Taz (never worked)
  • 3D printer computer: Dell Optiplex 760
  • 3D printer: Rostock (needs extruder mount)
  • Fire extinguisher: Kidde (recommend moving)
  • 3D printer: Monoprice (works)
  • Coffee maker: Sunbeam

East

  • 2 air conditioners: Frigidaire
  • Video screen
  • DC power outlets: MFJ MFJ-1128
  • Audio unit: Focal Power Bird
  • Digital repeater: DR-1X
  • Duplexer: Phelps Dodge 696
  • AV surround receiver: Denon AVR-1908
  • Power amp: Crown CP660
  • Function generator: HP 3312A
  • Unidentified unit: Swan
  • Unidentified unit: Swan
  • Unidentified unit
  • Radio equipment: Echophone Commercial
  • Power supply: Astron RS-50M
  • Amp: Elecraft KPA1500
  • Autotuner: LDG Electronics YT-1200
  • Transceiver: Yaesu FT-991
  • Direction control: hy-gain
  • Power supply: Elecraft KPA1500
  • 2 FRS/GMRS radios: Cobra microTALK
  • TV computer: LG Sharkoon
  • Gigabit switch: D-Link DGS-1005D
  • Video camera: XBOX 360
  • Voltage regulator: Seven Star AR-5000
  • Video game controllers (many)
  • Monitor
  • VR headset
  • Computer
  • SEM

South

  • Speaker: Tannoy B50 (assumed)
  • Power supply: Power Mate Corp. PXS-C-5-V
  • Monitor: Lenovo
  • Printer: IBM 4312
  • Tripod
  • 4 speakers: JBL
  • Bin labeled John Pancoast W3HAC
  • Light: 12V LED
  • Speaker: Tannoy B50 (assumed)
  • Microscope: Tasco
  • Pulse generator: Wavetek Model 801 (50MHz)
  • Oscilloscope: COS6150
  • Tabletop computers
  • (Monitor: MultiSync 1980SX)
  • (Monitor: Lenovo ThinkVision)
  • (Speaker: Evolution TS5500)
  • Laser cutter
  • Fire extinguisher: Kidde (RECALLED - call Kidde to get it replaced free)
  • Oscilloscope: Tektronix TDS 224
  • Soldering system: Aoyue Int 2738A
  • Power supply: Velleman HQ Power PS1503SBU
  • Power supply: Kepco MPS 620M
  • Soldering iron: Weller WES51
  • Soldering iron: Weller WSM 1C
  • Soldering iron: Therm-o-trac 1002

West

  • Video microscope: Sony
  • 3D printer: Ultimaker
  • (Computer: ASUS Eee Box (old 3D printer))
  • (Printer computer (not working, will not boot up))
  • Printer/copier: Brother DCP8060 (works)
  • (Monitor)
  • Renderadmin computer
  • Gigabit switch: Netgear GSS116E
  • Refrigerator
  • (belt sander)
  • Magnetic sweeper
  • Stepladder