Actions

PA SEM: Difference between revisions

From HacDC Wiki

(Link to Vacuum Gage)
(update)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
Project Summary


Project Code: SEM
== Project Summary ==
Project Contact: Ethan Waldo
Project Status: Proposed


Project Description: Formalize, fund, and accelerate the efforts
required to realize a fully operational Scanning Electron Microsope[1]
(SEM) including its operation, maintenance, and stewardship.


Links To Other Project Pages:
'''Project Code:''' SEM
http://wiki.hacdc.org/index.php/Category:Stereoscan
'''Project Contact:''' Julia Longtin
License or IP status: Project developments are not expected to be
'''Project Status:''' Active
affected by upstream licensing


Additional Info:
'''Project Description:''' Formalize, fund, and accelerate the efforts required to realize a fully operational Scanning Electron Microsope[1] (SEM) including its operation, maintenance, and stewardship.
Supporting acquisition, refurbishment, operation, and stewardship of a
Scanning Electron Microscope[1] (SEM) provides for a unique ability to
train a new generation of scientists and engineers, develop radically
new technology, greatly improve public relations for hackers, attract
new funding and talent, and further distinguish HacDC in its unique
Washington DC location. A SEM and knowledgeable operators are neither
a piece of equipment nor a skill set readily available among the
general public. Such equipment covers all STEM[2] fields and has a
wide-range of applications, with electron-beam lithography[3] being
something most relevant to the immediate interests of a hacker space.


The project will proceed in four foreseeable stages which do not need
'''Links To Other Project Pages:'''
to be carried out serially, but their order of importance should be
* http://wiki.hacdc.org/index.php/Category:Stereoscan
ranked as such. The first stage will focus on refurbishing the
'''License or IP status:''' Project developments are not expected to be affected by upstream licensing
existing Cambridge Stereoscan S200[4][5][6] to an operational state.
The second stage will focus on ensuring and maintaining operability of
the SEM for various approved tasks (i.e. typical sample operation,
lithography, etc). The third stage will focus on enhancing existing
functionality (i.e. SEM PCB reproduction, X-ray spectroscopy). The
fourth stage will focus on expanding on success which will likely be
contingent on proven success (i.e. considering and acquiring more
modern microscopy equipment).


The project owner (Ethan Waldo) desires to run this project as a
'''Additional Info:'''
representative democracy, allowing all members a reasonable
Supporting acquisition, refurbishment, operation, and stewardship of a Scanning Electron Microscope[1] (SEM) provides for a unique ability to train a new generation of scientists and engineers, develop radically new technology, greatly improve public relations for hackers, attract new funding and talent, and further distinguish HacDC in its unique Washington DC location. A SEM and knowledgeable operators are neither a piece of equipment nor a skill set readily available among the general public. Such equipment covers all STEM[2] fields and has a wide-range of applications, with electron-beam lithography[3] being something most relevant to the immediate interests of a hacker space.
opportunity to push proposals and vote, but with oversight by the
Board of Directors who will be responsible for providing stewardship
of rare and historic equipment and long-term investments.


Examples of equipment or services that may be needed or desired at one
The project will proceed in four foreseeable stages which do not need to be carried out serially, but their order of importance should be ranked as such.
time or another:
# The first stage will focus on refurbishing the existing Cambridge Stereoscan S200[4][5][6] to an operational state.
High voltage multimeter and/or oscilloscope probes, built or purchased
# The second stage will focus on ensuring and maintaining operability of the SEM for various approved tasks (i.e. typical sample operation, lithography, etc).
fully assembled
# The third stage will focus on enhancing existing functionality (i.e. SEM PCB reproduction, X-ray spectroscopy).
Discrete PCB components for replacement (i.e. resistors, capacitors,
# The fourth stage will focus on expanding on success which will likely be contingent on proven success (i.e. considering and acquiring more modern microscopy equipment).
relays, ICs, etc.)
Pump repair kits and oil
Vacuum seal parts and grease
Cleaning solvents
Desiccant dehumidifier
Sputter coating machine and alloy material
Surplus add-on equipment (i.e. X-ray spectroscopy)
FPGA kits for circuit board reproduction


References:
The project owner desires to run this project as a representative meritocracy, allowing all members a reasonable opportunity to push proposals and vote, but with oversight by the Board of Directors who will be responsible for providing stewardship of rare and historic equipment and long-term investments.
 
'''Examples of equipment or services that may be needed or desired at one time or another:'''
* High voltage multimeter and/or oscilloscope probes, built or purchased fully assembled
* Discrete PCB components for replacement (i.e. resistors, capacitors, relays, ICs, etc.)
* Pump repair kits and oil
* Vacuum seal parts and grease
* Cleaning solvents
* Desiccant dehumidifier
* Sputter coating machine and alloy material
* Surplus add-on equipment (i.e. X-ray spectroscopy)
* FPGA kits for circuit board reproduction
 
=== References: ===
1. https://en.wikipedia.org/wiki/Scanning_electron_microscope
1. https://en.wikipedia.org/wiki/Scanning_electron_microscope
2. https://en.wikipedia.org/wiki/Science,_Technology,_Engineering,_and_Mathematics
2. https://en.wikipedia.org/wiki/Science,_Technology,_Engineering,_and_Mathematics

Latest revision as of 18:20, 25 November 2017

Project Summary

Project Code: SEM Project Contact: Julia Longtin Project Status: Active

Project Description: Formalize, fund, and accelerate the efforts required to realize a fully operational Scanning Electron Microsope[1] (SEM) including its operation, maintenance, and stewardship.

Links To Other Project Pages:

License or IP status: Project developments are not expected to be affected by upstream licensing

Additional Info: Supporting acquisition, refurbishment, operation, and stewardship of a Scanning Electron Microscope[1] (SEM) provides for a unique ability to train a new generation of scientists and engineers, develop radically new technology, greatly improve public relations for hackers, attract new funding and talent, and further distinguish HacDC in its unique Washington DC location. A SEM and knowledgeable operators are neither a piece of equipment nor a skill set readily available among the general public. Such equipment covers all STEM[2] fields and has a wide-range of applications, with electron-beam lithography[3] being something most relevant to the immediate interests of a hacker space.

The project will proceed in four foreseeable stages which do not need to be carried out serially, but their order of importance should be ranked as such.

  1. The first stage will focus on refurbishing the existing Cambridge Stereoscan S200[4][5][6] to an operational state.
  2. The second stage will focus on ensuring and maintaining operability of the SEM for various approved tasks (i.e. typical sample operation, lithography, etc).
  3. The third stage will focus on enhancing existing functionality (i.e. SEM PCB reproduction, X-ray spectroscopy).
  4. The fourth stage will focus on expanding on success which will likely be contingent on proven success (i.e. considering and acquiring more modern microscopy equipment).

The project owner desires to run this project as a representative meritocracy, allowing all members a reasonable opportunity to push proposals and vote, but with oversight by the Board of Directors who will be responsible for providing stewardship of rare and historic equipment and long-term investments.

Examples of equipment or services that may be needed or desired at one time or another:

  • High voltage multimeter and/or oscilloscope probes, built or purchased fully assembled
  • Discrete PCB components for replacement (i.e. resistors, capacitors, relays, ICs, etc.)
  • Pump repair kits and oil
  • Vacuum seal parts and grease
  • Cleaning solvents
  • Desiccant dehumidifier
  • Sputter coating machine and alloy material
  • Surplus add-on equipment (i.e. X-ray spectroscopy)
  • FPGA kits for circuit board reproduction

References:

1. https://en.wikipedia.org/wiki/Scanning_electron_microscope 2. https://en.wikipedia.org/wiki/Science,_Technology,_Engineering,_and_Mathematics 3. https://en.wikipedia.org/wiki/Electron-beam_lithography 4. https://en.wikipedia.org/wiki/Cambridge_Scientific_Instrument_Company 5. https://en.wikipedia.org/wiki/Scanning_electron_microscope#History 6. http://blogs.zeiss.com/microscopy/news/en/1965-2015-50-years-of-excellence-in-electron-microscopy/ 7. 925 MicroPirani (TM) Vacuum Pressure Transducer RS232 / 485 / Display Operation and Installation Manual

Retrieved from "https://wiki.hacdcserver.org/index.php?title=PA_SEM&oldid=14047"