Inventory: Difference between revisions
From HacDC Wiki
(→3D Printers: - location update) |
Ubuntourist (talk | contribs) (Added link to TDS-224 user manual) |
||
(4 intermediate revisions by 2 users not shown) | |||
Line 27: | Line 27: | ||
* Lulzbot Taz #1 - 3d printing workstation, left side. | * Lulzbot Taz #1 - 3d printing workstation, left side. | ||
* SeeMeCNC RockStock Max - 3d printing workstation, right side. | * SeeMeCNC RockStock Max - 3d printing workstation, right side. | ||
* Lulzbot Taz #2 - | * Lulzbot Taz #2 - Classroom back table. | ||
* Ultimaker 2 - Classroom back table. | * Ultimaker 2 - Classroom back table. | ||
* RepRaps - Classroom shelves. | * RepRaps - Classroom shelves. | ||
* OpticalTableRobot - Basement front room | * OpticalTableRobot - Basement front room. | ||
* see: http://wiki.hacdc.org/index.php/3D_Printing_Supplies | * see: http://wiki.hacdc.org/index.php/3D_Printing_Supplies | ||
Line 129: | Line 129: | ||
* VR-Ready PC, GTX 1070 GPU - on loan from Enrique - classroom | * VR-Ready PC, GTX 1070 GPU - on loan from Enrique - classroom | ||
* SIP Conference Phone with wireless mics - Ethan - classroom | * SIP Conference Phone with wireless mics - Ethan - classroom | ||
* [[OBi110_VoIP_setup|OBi-110 single phone port Analog Telephone Adapter (ATA)]] | |||
== Electronic Measurement & Diagnostic == | == Electronic Measurement & Diagnostic == | ||
Line 150: | Line 151: | ||
* Multimeter, Simpson 260 - K1 | * Multimeter, Simpson 260 - K1 | ||
* Frequency Counter, HP 5382A - K1 | * Frequency Counter, HP 5382A - K1 | ||
* Oscilloscope, 100 MHz, Tektronix TDS 224 - classroom | * Oscilloscope, 100 MHz, [https://www.tek.com/oscilloscope/tds210-manual/tds200-series-user-manual Tektronix TDS 224] - classroom | ||
* Oscilloscope, 150 MHz COS6150 - classroom cart | * Oscilloscope, 150 MHz COS6150 - classroom cart | ||
* Oscilloscope, 100 MHz, Hitachi VC-6155 - classroom cart | * Oscilloscope, 100 MHz, Hitachi VC-6155 - classroom cart |
Latest revision as of 01:59, 26 November 2019
Storage Room Shelves are Labeled A1 thru K6
Project Storage
- Spaceblimp: Classroom Shelves.
- SEM: Classroom front right.
- CRISPR: Classroom Shelves.
- Spacecam: Basement shelf F.
- OTR: Front basement shelf.
For a list of supplies deliberately kept in stock, see Category:PA_SUPPLIES
Safety
- Gloves Vinyl & Nitrile - Basement Entrance
- Dusk Masks, Respirator - Basement Entrance
- Hearing protection - Basement Entrance, Classroom
- Goggles - Basement Entrance
- Hard Hat - Basement Entrance
- Fire Extinguishers - Classroom Entrance
- Fire Extinguishers - Classroom Shelves (South)
- Fire Extinguishers - Classroom Shelves (North)
- Fire Extinguishers - Basement Mid-Doorway
3D Printers
- Lulzbot Mini - Classroom shelves, to right of Rostock.
- Lulzbot Taz #1 - 3d printing workstation, left side.
- SeeMeCNC RockStock Max - 3d printing workstation, right side.
- Lulzbot Taz #2 - Classroom back table.
- Ultimaker 2 - Classroom back table.
- RepRaps - Classroom shelves.
- OpticalTableRobot - Basement front room.
- see: http://wiki.hacdc.org/index.php/3D_Printing_Supplies
2D Printers
- Laserjet printer, HP 1020 - radio desk
- Laserjet printer, HP - classroom shelves
- Inkjet printer, HP Officejet Pro 8500 Wireless - radio desk
- Inkjet printer, HP 2500CM - D4
- Inkjet printer, HP Officejet J5780 All-in-one - E3
- Plotter, HP - borrowed by Mirage335
- Sewing machine - C4
Machine Shop & Woodworking
- Welder, Rod, Craftsman 35-230A, <=3/16" rod - opposite E5
- Welding Rods, opposite E5
- Brazing Rods, opposite E5
- Welding Mask - opposite E5
- CNC Mill - opposite B1
- Drill press - opposite G1
- Manual lathe - opposite G1
- Mill tools, drill bits, stock,
see: http://wiki.hacdc.org/index.php/CNC_Supplies
- Dolly cart (Loan from Bobby) - Basement
- Great Stuff Spray Insulation - Basement Entrance
- Hammer drill, Chicago Electric (Loan from Bobby) - closet
- Paints - Basement Entrance
- Power Drill, Dewalt - classroom
- Power Drill, Makita - Basement Entrance
- Rotary Tool, flexible - opposite A1
- Saw, Circular - Basement Entrance
- Saw, Miter (Loan from Bobby) - opposite G1
- Saw, Jigsaw - Basement Entrance
- Saws, Hand saws - Basement Entrance
- Saws, Hacksaws - Basement Entrance
- Saws, Hole saws- Basement Entrance
- Sander - Basement Entrance
- Torque wrench, Proto J6113F 0-50 FTLB - classroom
Electronic Components & Soldering Tools
- Resistors - Classroom shelves
- Capacitors - Classroom shelves
- Diodes - Classroom shelves
- Light Emitting Diodes LED - Classroom Shelves
- IC Packages - Classroom shelves
- Battery holders, 1.5V - Classroom Radioshack
- Battery holders, 9V - Classroom Radioshack
- Multimeters, Assorted - Classroom shelves
- Soldering Hot Air Rework Station, AOYUE Int 968 - classroom
- Soldering Iron, Weller WSM 1C - classroom
- Soldering Iron, Weller WE51 - classroom
- Solder, Pb-Sn
- Solder, Ag
- Potentiometers & Knobs - classroom RadioShack
- Power connectors - classroom RadioShack
- Buzzers & Motors - classroom RadioShack
- Capacitors - classroom RadioShack
- RF/TV Connectors - classroom RadioShack
- TV/Video Connectors - classroom RadioShack
- Audio Connectors - classroom RadioShack
- Fuses - classroom RadioShack
- Magnets - classroom RadioShack
- Enclosures, for Projects - B5
Power Supplies, Wall Warts, Transformers
- Power Adapters, 18V - H6
- Power Adapters, 15V - H6
- Power Adapters, 12V - H5
- Power Adapters, +/- 12V & Adjustable - G4
- Power Adapters, 9V - H5
- Power Adapters, 5V - H4
- Power Adapters, Misc - H4
- AC Transformer, 60kV - G3
Computer & Networking Equipment
- Raspberry Pi B+ - Classroom over SEM
- Rasbperry Pi 2Bs - Classroom over SEM
- Raspbeery Pi Sense HATs - Classroom over SEM
- Arduino Nanos - Classroom over SEM
- Microcontrollers, ATMega - Classroom over SEM
- Intel Edison Dev boards - Classroom over SEM
- Intel Edison Arduino boards - Classroom over SEM
- WiFi Routers - Classroom shelves
- Hard Drives - G5
- Optical Drives - G5
- DRAM - G6
- Keyboards and Mice - J4
- LCD Displays - opposite G4
- Routers & Hubs - opposite G4
- Satellite Router 18Mbps/5Mbps, iDirect 3000 series - C4 / Ethan W
- Broadband Satellite Comm, Nera WorldPro 1010 - C4 / Ethan W
- Ethernet Cables - J6
- Ethernet Cable Spool - J6
- Parallel Port Cables IEEE - J 5
- USB Cables, A-B - Classroom shelves
- USB Cables, A-Micro - Classroom shelves
- VR Headset, Oculus Rift - on loan from Enrique - classroom
- VR-Ready PC, GTX 1070 GPU - on loan from Enrique - classroom
- SIP Conference Phone with wireless mics - Ethan - classroom
- OBi-110 single phone port Analog Telephone Adapter (ATA)
Electronic Measurement & Diagnostic
- BNC Coax Cables & Adapters - J3
- Spectrum Analyzer, Wellerman PC Scope 50 MHz 1GS/s - classroom cart
- Multimeter, Keithley 178 - classroom cart
- Network Analyzer, MiniVNA Radio Solutions - classroom cart
- Network Analyzer Extender - classroom cart
- Pulse Counter, Phillips PM 6668 - classroom cart
- Pulse Generator, Wavetek 50 MHz - classroom cart
- Universal Software Radio (on loan) - classroom cart
- Signal Generator/Counter 150 MHz, Elenco 9500 - classroom cart
- Sweep Function Generator, Wavetek 273 - classroom cart
- Power Supply, Dual 1A 40V, Lambda 4225-FM - classroom cart
- Power Supply, Dual 40V 3A / 20V 6A - classroom
- Multimeters, Assorted - C1
- Voltmeter, True RMS HP 3403C - K1
- Multimeter, Fluke 87III - classroom
- Multimeter, Simpson 467 - K1
- Multimeter, Kethley 178 - K1
- Multimeter, Simpson 260 - K1
- Frequency Counter, HP 5382A - K1
- Oscilloscope, 100 MHz, Tektronix TDS 224 - classroom
- Oscilloscope, 150 MHz COS6150 - classroom cart
- Oscilloscope, 100 MHz, Hitachi VC-6155 - classroom cart
- Oscilloscope, HP 182A - K1
- Oscilloscope, Phillips PM 3216, 35MHz - K2
- Oscilloscope, CRBI 255
- Oscilloscope, Tektronics 5110 - K3
- Oscilloscope, F4
- Tektronics TM 505
- Spectrum Analyzer FFT, Nicolet Sci Corp 444A Mini-Ubiquitous - J3
- Signal Counter 5512A - K3
- Function Generator, Noise Generator - K3
- Function Generator 2 MHz - K3
- Signal Tracer, Transistorized - K1
- Retina Scanner - K1
- Charge Amplifier, Bruel & K 2635 - K1
- Audio Spectrum Analyzer, Kay Sona-Graph 5500 - K1
- Octave Filter, Ithaco 4302 - K1
- Attenuator Set HP 5500 (2) - K1
- Tracking Filter, Krohn-Hite 3800 - K2
- Pulse Generator / Delay, SRS DG535 (2) - K2
- Power Supply 25V 250mA, Marconi 6590B - K2
- Universal Programmer, MOS Pak Data I/O - J2
Optical Parts & Cameras
- Lasers, Mirrors, Lenses, Filters, Diffuses
see: http://wiki.hacdc.org/index.php/OpticalSupplies
- CCTV Camera Turrets - opposite G5
- CCTV Remote Control Consoles - B4
- Projector, LCD - B4
- Picture Frames, LCD - B4
- Video breakout box, 6:1 BNC - B4
- Tripods, E3
- Camcorder, Digital - BOD Locker
- Microscope Kit, Optical, plastic (borrowed by Ben 2)
- Microscope, Optical 1200X - B1 (borrowed by Ben 2)
- Microscope, Optical 2000X, OMAX - CRISPR Supplies (on loan from Nancy W)
- Fiber Optic Cable - G2
- Fiber Optic Test Set, Digital Canyon FT-1500 - G2
- Optical Light Source, 850nm, 1300nm, Noyes OLS1 - G2
- Optical Power Meter, Noyes OPM1 - G2
- Camera, SLR, Nikon D50 - Classroom Lockers
Other
- Electon Microscope, Cambridge Stereoscan 200 - Classroom
- SEM (Electron Microscope) Parts & Supplies - A1
- see: http://wiki.hacdc.org/index.php/StereoscanSupplies
- Laser Cutter supplies - A1
- Soldering Kits - A2
- Big Electronics Course - A2
- Fans & Heatsinks - A3
- Batteries, Alkaline - G1
- Batteries, Rechargable - G1
- Inverter, 12VDC-120VAC - G1
- Fasteners, Screws, Machine - C1
- Fasteners, Screws, Wood - Basement Front Room
- Flexible Magnet Roll - D1
- AC Electrical Supplies - D1
- Chemicals, Acids - E1
- Chemicals, Solvents - E1
- Chemical Absorbent / Spill Kit - E1
- Motors, Electrical - D2
- Pneumatic Tubes, Pumps - D2
- Photolithography, PCB Etch - E2
- Wire loom, cable organizer - A6
- Radio repeater duplexer resonators - B3
- Radio related bin - B3
- Scale, digital - classroom (spaceblimp)
- Scale 30g, digital (on loan from Enrique) - Classroom (spaceblimp)
- Scale 30kg, digital (on loan from Enrique) - Classroom (spaceblimp)
- Sound level decibel meter (on loan from Enrique) - B1
- Pyrometer - (on loan from Enrique) - B1
- Vacuum Pump - E3
- Manometer, Digital, Keller Model LEX 1 - classroom
- Sputter coater, Denton Vacuum Desk II - E6
- Laminator, Lamitek PhotoPro - C5
- Speakers, 3' Floor, Kustom - E6
- Amplifiers, Audio - E3
- Amplifier, Yamaha - E3
- Subwoofer, 8-10" - E3
- Telephones - D4
- Microphones - D4
- Cash Register, Point-of-Sale - K6
- Credit Card Reader, POS Terminal - J6
- Geiger counter, Radiation meter - H1
- Tuning forks, 258-512 Hz - K2
- O-Rings, E1
Museum
- 35mm Slide Projector, C5
- Tape player, C5
Assigned Storage
- Enrique's Stuff - B1
- Dan's Stuff - Basement Front, Shelf 1 (top)
- Julia's Stuff - Basement Front, Shelf 3