CNC Mill Log: Difference between revisions

Revision as of 01:36, 10 July 2012

When something goes wrong, its nice to note it here. Also nice to note any fixes (eg. resurfacing the milling platform).

Milling platform is no longer level, thanks to the screws holding it down being loosened up. Needs resurfacing. 04/11/12

Someone accidentally resurfaced the milling platform (milled too deep). Now the platform needs replacing. 04/28/12

Platform still needs replacing, but Barlow resurfaced the remaining usable area. At least now it is level again. 07/10/12

Revision as of 23:54, 27 May 2012 (view source) Mirage335 (talk \| contribs) No edit summary ← Older edit		Revision as of 01:36, 10 July 2012 (view source) Mirage335 (talk \| contribs) No edit summary Newer edit →
Line 5:		Line 5:

	*Someone accidentally resurfaced the milling platform (milled too deep). Now the platform needs replacing. 04/28/12		*Someone accidentally resurfaced the milling platform (milled too deep). Now the platform needs replacing. 04/28/12

			*Platform still needs replacing, but Barlow resurfaced the remaining usable area. At least now it is level again. 07/10/12