AX.25: Difference between revisions
From HacDC Wiki
(Created page with "*OSI layer 2 (data link layer) protocol. Technically, it occupies layers 1-3. *Same layer as BATMAN-Advanced. *Used for packet radio by hams. *Can transport network layer protoc...") |
No edit summary |
||
| Line 2: | Line 2: | ||
*Same layer as BATMAN-Advanced. | *Same layer as BATMAN-Advanced. | ||
*Used for packet radio by hams. | *Used for packet radio by hams. | ||
*Can transport network layer protocols. | *Can transport network layer protocols, including IP. | ||
*Not designed to support switching, though routers can probably be set up to handle it. | *Not designed to support switching, though routers can probably be set up to handle it. | ||
*Support in the Linux kernel. | *Support in the Linux kernel. | ||
| Line 14: | Line 14: | ||
*KISS is a serial protocol. Thus, multiple serial channels are required for multiple transceivers. | *KISS is a serial protocol. Thus, multiple serial channels are required for multiple transceivers. | ||
*Other protocols fulfill the same function. | *Other protocols fulfill the same function. | ||
* | *Either half or full duplex modes. | ||
*Three components | |||
**Kernel module | |||
**Configuration utilities | |||
**Utility software | |||
*Each AX.25 network device ("port") must be configured with a callsign/SSID. | |||
*We would be using [[Notes_on_Soundmodem|soundmodem]] on top of this. | |||
[https://secure.wikimedia.org/wikipedia/en/wiki/AX.25 Wikipedia: AX.25] | [https://secure.wikimedia.org/wikipedia/en/wiki/AX.25 Wikipedia: AX.25] | ||
[http://www.tapr.org/pub_ax25.html About AX.25] | |||
[http://tldp.org/HOWTO/AX25-HOWTO/ Linux AX.25 Howto] | |||
Revision as of 14:55, 21 March 2011
- OSI layer 2 (data link layer) protocol. Technically, it occupies layers 1-3.
- Same layer as BATMAN-Advanced.
- Used for packet radio by hams.
- Can transport network layer protocols, including IP.
- Not designed to support switching, though routers can probably be set up to handle it.
- Support in the Linux kernel.
- v2.6.x: ax25.ko
- Commonly used with three different communication specs:
- Bell 103 tones @ 300bps
- Bell 202 tones @ 1200bps
- G3RUH DFSK @ 9600bps
- These speeds are hard limits.
- KISS encapsulates frames such that they can be send to a TNC for transmission. Derived from SLIP.
- KISS is a serial protocol. Thus, multiple serial channels are required for multiple transceivers.
- Other protocols fulfill the same function.
- Either half or full duplex modes.
- Three components
- Kernel module
- Configuration utilities
- Utility software
- Each AX.25 network device ("port") must be configured with a callsign/SSID.
- We would be using soundmodem on top of this.