BATMAN-Advanced Setup: Difference between revisions
From HacDC Wiki
m (updating with HIGHLY QUESTIONABLE EXPLICITNESS) |
Haxwithaxe (talk | contribs) |
||
| Line 18: | Line 18: | ||
In the unpacked 'batman-adv' directory: | In the unpacked 'batman-adv' directory: | ||
# <pre># insmod batman-adv.ko</pre> | # <pre># insmod batman-adv.ko</pre> | ||
In the batctl directory: | |||
# <pre># ./batctl if add wlan0</pre> | # <pre># ./batctl if add wlan0</pre> | ||
# <pre># ifconfig wlan0 mtu 1527</pre> | # <pre># ifconfig wlan0 mtu 1527</pre> | ||
Revision as of 00:04, 27 February 2011
Compile and install BATMAN-Advanced
Download batman-adv and batctl. Standard "make && sudo make install".
If no interface "wlan0" exists, check for a different wireless interface using 'ifconfig -a'
Setup ad-Hoc network
- Disable NetworkManager
- Fedora:
# /etc/init.d/NetworkManager stop
- Ubuntu:
# stop network-manager
- Fedora:
- Disable the firewall
# iptables -F
# ifconfig wlan0 down
# iwconfig wlan0 mode ad-hoc essid hacdc-batman channel 8
# ifconfig wlan0 up
Setup BATMAN-Advanced
In the unpacked 'batman-adv' directory:
# insmod batman-adv.ko
In the batctl directory:
# ./batctl if add wlan0
# ifconfig wlan0 mtu 1527
# echo bat0 > /sys/class/net/wlan0/batman_adv/mesh_iface
# cat /sys/class/net/wlan0/batman_adv/iface_status
Should read "active".# ifconfig wlan0 0.0.0.0
???