Actions

Microfabrication Class: Difference between revisions

From HacDC Wiki

 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
== HacDC inquiry-level Microfabrication class ==
== HacDC Microfabrication class ==


=== Dates and Times ===
=== Dates and Times ===


The class will be held remote (and possibly in the Space) bi-weekly on Mondays ("Monday Microfabrication") 7 to 9 PM.  
The class will be held remote (and possibly in the Space) bi-weekly on Mondays ("Microfabrication Mondays") 7 to 9 PM.  


=== Resources ===
== Purpose ==
 
* Inspired by recent spate of homemade semi-conductor pioneers (Sam Zeloof, et al)
 
== Resources ==


* Scanning Electron Microscope (SEM)
* Scanning Electron Microscope (SEM)
** Ethan currently has Cambridge SEM (for repairs)
** Ethan currently has Cambridge SEM (for repairs) - get pumps working and operate the controller manually; currently doesn't seem to hold pressure; the vacuum is really key to getting it working
** Ethan's SEM
** Ethan's SEM


* Resin 3D printers (personally-owned)
* Resin 3D printers (personally-owned)


=== Approaches, project implementation ===
== Class Notes ==
 
# Collaborative - work as a group on the same project (something new, something done before)
# Independent - everyone work independently on their projects


=== Approaches, tech implementation ===
* [[Microfabrication_Class_Notes_2021_11_22|2021 11 22]]
* [[Microfabrication_Class_Notes_2021_12_06|2021 12 06]]


# Use an SEM
== Field Trips ==
## Option 1 - get enough of the SEM fixed to operate manually
* University of Maryland "Clean Room" just to see one in action
## Option 2 - get the full SEM working
* Howard University "Clean Room" - is open to public (?)
## Option 3 - get the obviously broken part fabricated and replace it (part on back with dent in back of the SEM)
## Option 4 - do Project Awesome fundraising project
## Option 5 - the sputtering system issue needs to be resolved as part of the microfab process
## Option 6 - a cleaning chamber issue needs to be resolved as part of the microfab process
## Option 7 - working with hydrogen chloride indoors to etch glass issue needs to be resolved as part of the microfab process
## Option 8 - decide on wet etching vs. dry etching
## Option 9 - "rent" Ethan's personal-use SEM (assuming its working)
# Use The-Next-Best-Thing
## Option 1 - Sonic 8K - can -- stick PCB to layers of resin directly to fabricate things at 28 microns


[[Category:Classes]]
[[Category:Classes]]

Latest revision as of 00:59, 7 December 2021

HacDC Microfabrication class

Dates and Times

The class will be held remote (and possibly in the Space) bi-weekly on Mondays ("Microfabrication Mondays") 7 to 9 PM.

Purpose

  • Inspired by recent spate of homemade semi-conductor pioneers (Sam Zeloof, et al)

Resources

  • Scanning Electron Microscope (SEM)
    • Ethan currently has Cambridge SEM (for repairs) - get pumps working and operate the controller manually; currently doesn't seem to hold pressure; the vacuum is really key to getting it working
    • Ethan's SEM
  • Resin 3D printers (personally-owned)

Class Notes

Field Trips

  • University of Maryland "Clean Room" just to see one in action
  • Howard University "Clean Room" - is open to public (?)