Actions

File

Float-switch-base.stl: Difference between revisions

From HacDC Wiki

(added category)
(James uploaded a new version of "File:Float-switch-base.stl": Version 3. Shortened thread sockets to 5 threads. Added inlet chamfer to threads. Added 0.5mm diameter tolerance to threads.)
(No difference)

Revision as of 03:38, 8 May 2017

Base of cooling water level float switch. Needs 1/4-20 all thread legs, or I could redesign it to use two packs of chopsticks. Version 2.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current05:12, 10 May 2017 (32.91 MB)James (talk | contribs)v5 update to adjust screw threads
03:38, 8 May 2017 (22.89 MB)James (talk | contribs)Version 3. Shortened thread sockets to 5 threads. Added inlet chamfer to threads. Added 0.5mm diameter tolerance to threads.
21:26, 1 May 2017 (37.1 MB)James (talk | contribs)Base of cooling water level float switch. Needs 1/4-20 all thread legs, or I could redesign it to use two packs of chopsticks. Version 2.

The following page uses this file: