Actions

Category

OpticalTable: Difference between revisions

From HacDC Wiki

No edit summary
 
(5 intermediate revisions by the same user not shown)
Line 6: Line 6:


=Status=
=Status=
On blocks, awaiting paint removal, leveling, and basement cleanup.
Operational, standing on pneumatic legs.
 
Optical and mechanical hardware in progress. Gantry is planned to enable ultra high-accuracy and wide area CNC milling, laser cutting, and 3D printing.


=Specifications=
=Specifications=
Not known with certainty, some estimations follow:
Not known with certainty, some estimations follow:
*Rigidity sufficient for safe mechanical use.
*Tapped holes.
*Steel surface, epoxy/metal honeycomb base.
*Can be kept level to within ~15nm.
*Heavy - 800 pounds (350kg).
*Heavy - 800 pounds (350kg).
*Steel surface, epoxy/metal honeycomb base.
*Can be leveled to 15nm or so.
*Rigidity sufficient for safe mechanical use.
*Pneumatic mounting.
*Pneumatic mounting.
*Tapped holes.


=Associated Equipment=
=Associated Equipment=
Lens and mirror mounts, micro-manipulators, high voltage (6kW) power supplies, and lasers are available.
*Big (~40x40mm) aluminum extrusions, sufficient to equip entire table with a gantry.
*Lens and mirror mounts.
*Wide variety of optical elements, lenses, mirrors, beam splitters, fibers, telescope, microscope, etc.
*Micro-manipulators.
*Lasers.
*High voltage (up to 6kW) power supplies.


=Safety=
=Safety=
High voltage power supplies and laser are dangerous, with a lot of subtle "gotchas". Don't play with them unless highly experienced.
High voltage power supplies and powerful lasers are dangerous, with a lot of subtle "gotchas". Don't play with them unless highly experienced.

Latest revision as of 16:22, 23 June 2015


OpticalTable.jpg

HacDC's Optical Table

Status

Operational, standing on pneumatic legs.

Optical and mechanical hardware in progress. Gantry is planned to enable ultra high-accuracy and wide area CNC milling, laser cutting, and 3D printing.

Specifications

Not known with certainty, some estimations follow:

  • Rigidity sufficient for safe mechanical use.
  • Tapped holes.
  • Steel surface, epoxy/metal honeycomb base.
  • Can be kept level to within ~15nm.
  • Heavy - 800 pounds (350kg).
  • Pneumatic mounting.

Associated Equipment

  • Big (~40x40mm) aluminum extrusions, sufficient to equip entire table with a gantry.
  • Lens and mirror mounts.
  • Wide variety of optical elements, lenses, mirrors, beam splitters, fibers, telescope, microscope, etc.
  • Micro-manipulators.
  • Lasers.
  • High voltage (up to 6kW) power supplies.

Safety

High voltage power supplies and powerful lasers are dangerous, with a lot of subtle "gotchas". Don't play with them unless highly experienced.

Subcategories

This category has only the following subcategory.

Pages in category "OpticalTable"

The following 2 pages are in this category, out of 2 total.