Revision as of 06:10, 2 April 2014

Wishlist

Not available, but may be needed.

Replacement "O" ring for chamber->gun vacuum tube, for the chamber-side mounting adapter. (Will this work? http://www.grainger.com/product/O-Ring-1RHY8)
- Tim G., SEM contact, says any old Viton o-ring is suitable.
- Ring measures 56mm Dia., 2.75mm thickness. Source
- Plasma (talk) 23:10, 1 April 2014 (PDT)

Inland 19 pump oil for Edwards E2M-12 roughing pump: http://www.sisweb.com/vacuum/sis/inland.htm ($30 per gallon) (needs confirmation that this oil is suitable)

Already at the space.

Apiezon M vacuum grease for "O" rings, to be used for vacuum seals at room temperature: http://www.2spi.com/catalog/vac/apiezon/apiezon-m.php ($70 for 25g). Edit: page 058 of the manual states "The use of O ring grease is not recommended on any O rings, but a small amount may be used, if necessary, on moving seals e.g. the specimen stage and apereture changer micrometers."
- 31Mar2014 - there's a syringe of Ap. T grease in the space (~2g). It's on top of the SEM's chamber atm.

Frequently burned up in normal operation.

E-Beam Emission Filament. Hopefully we can keep that item out of the 'RoutinelyConsumed' category by warming it up gently.

@@ Line 6: / Line 6: @@
 * Replacement "O" ring for chamber->gun vacuum tube, for the chamber-side mounting adapter. (Will this work?  http://www.grainger.com/product/O-Ring-1RHY8)
+** Tim G., SEM contact, says any old Viton o-ring is suitable.
+** Ring measures 56mm Dia., 2.75mm thickness.  [http://i.imgur.com/Yg3Knvi.jpg Source]
+**
+** [[User:Plasma|Plasma]] ([[User talk:Plasma|talk]]) 23:10, 1 April 2014 (PDT)
 * Inland 19 pump oil for Edwards E2M-12 roughing pump: http://www.sisweb.com/vacuum/sis/inland.htm ($30 per gallon) (needs confirmation that this oil is suitable)